Silver Jubilee and Alumni Homecoming 2019

We are proud to announce that your alma mater, GIK Institute is celebrating its 25th Anniversary and Alumni Homecoming on January 5-6, 2019. GIK Institute is happy to invite you for all the events and activities that are being organized for 2019 alumni homecoming.. Go to this page for details

Archive: Vacancies & Notices

Join as Professor, Assistant Professor


Join as:   Professor Associate Professor Assistant Professor                      Research Associate   Applications are invited from well qualified persons for the positions of Professor, Associate Professor, Assistant Professor and Research Associate (candidates possessing PEC registration number would be given preference) in the following disciplines:   Electrical Engineering (specialization in Electronics or Power)   Mechanical Engineering (specialization in Dynamics, Vibration, Design and Mechatronics)   Engineering Sciences ( specialization in Electronics/Photonics, Physics and Mathematics)   Requisite qualifications and experience are appended below:     REQUISITE QULAIFICATIONS AND EXPERIENCE   PROFESSOR   PhD in the relevant discipline from a recognized university abroad or acceptable equivalent with six (6) years’ experience as Associate Professor and 12 research publications in refereed journals of international repute or 11 years post PhD teaching and research experience with 12 research publications in refereed journals of international repute. Two years industrial experience in organizations of international repute will be considered equivalent to one year of teaching and research experience in the university.   Candidates for Professorship must have demonstrated that their research achievements have had a recognized impact on the advance of knowledge in their subject area(s).   ASSOCIATE PROFESSOR   PhD in the relevant discipline from a recognized university abroad or acceptable equivalent with five (5) years’ service as Assistant Professor and six (6) research publications in refereed journals of international repute. Two years industrial experience in an organization of international repute will be considered equivalent to one year of teaching and research experience in the university. The applicant should have demonstrated the capability to conduct independent and original research.   ASSISTANT PROFESSOR PhD in the relevant discipline from a recognized university abroad or acceptable equivalent, preferably with some publications in refereed journals of international repute. The applicant should have demonstrated the capability to conduct independent and original research.     RESEARCH ASSOCIATE   Master’s degree in the relevant field(s) from a reputable university recognized by HEC, preferably having experience of teaching and research.   GIK offers attractive salary packages and fringe benefits / facilities. Interested candidates should send their detailed CVs and a recent photograph to the HR Department by 21st December, 2018. Only shortlisted applicants will be called for interview.     Assistant Director (HR)                           GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa, Ph: 0938-281026 Ext: 2442 E-mail: dirhr@giki.edu.pk (GIK Institute is an equal opportunity employer)       ...
Read more...

Tender # GIKI/PD/FME/SRGP-669/18 FOR PURCHASE OF RESEARCH LAB EQUIPMENT UNDER HEC SRGP Project


  TENDER NOTICE FOR PURCHASE / SUPPLY OF RESEARCH LAB EQUIPMENT Tender no. GIKI/P/FME/SRGP-669/18 Sealed bids (single stage one envelope) according to PPRA Procurement Rules are invited from reputed firms/ suppliers for the supply of Research Lab equipment – being funded under HEC (Startup Research Grant Program). Detailed specifications and conditions are given in the tender documents which can be downloaded from PPRA and GIKI websites (www.giki.edu.pk)/ (www.ppra.org.pk) Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on November 21st 2018. Proposals will be opened in the presence of bidders at 03:30 pm on the same day. Assistant Director Procurement, GIK Institute, Topi (KP) Ph: 0938-281026 Ext. 2444, Email: taufeeq@giki.edu.pk     ...
Read more...

Vacancies Announcement for Promoting Enterprises of Reverse Engineering


The Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, under a Government of Khyber Pakhtunkhwa sponsored project titled “Promoting Enterprises of Reverse Engineering” invites applications from the suitable male and female candidates (Khyber Pakhtunkhwa domiciled) for the posts mentioned below under the existing provincial project policy with following terms of reference: Project Manager Mechanical Design  Engineer Computer Software Engineer Computer Hardware Engineer Manufacturing Engineer S. # Name of the Post No. of Posts Age Limit Qualification/Experience Key Responsibilities       1.     Project Manager (Equivalent to BPS-18)       1       26-40 Postgraduate degree in Engineering                              (Preferably Mechanical)with 05 years relevant experience of project management in the area of engineering design and manufacturing                                      intensive projects from a reputable organization. Responsible for overall operation of the project To ensure the smooth functioning of the project and will be responsible to implement, monitor and evaluate the staff of the project To build and create new relationships with a variety of stakeholders                 2.             Mechanical Design Engineer (Equivalent to BPS-17)                 1                 21-32             Bachelor degree in Mechanical Engineering with3 years of experience of design and manufacturing in a reputable company. Design          and                     optimization                     of Mechanical components Analysis of mechanical systems, including Finite Element Analysis for structural ,fatigue, thermal, vibration and acoustics Analysis and specification of electro- mechanical and electro-hydraulic systems Development of manufacturing drawings in accordance with applicable standards Construct and oversee technicians in fabrication of development systems Interfaces with outside vendors for  component selection, manufacturing and assembly Read    and    interpret           blueprints,           technical drawings, schematic and computer-generated reports                 3.             Computer Software Engineer (BPS- 17)                 1.                 21-32           Bachelor degree in Computer Software Engineering with 3 years of experience of Computer Software Development in a reputable company Confer with systems analysts, engineers, programmers and others to design system and to obtain information on project limitations and capabilities, performance requirements and interfaces. Modify existing software to correct errors, allow it to adapt to new hardware, or to improve its performance. Analyze user needs and software requirements to determine feasibility of design within time and cost constraints. Consult with customers about software system design and maintenance. Coordinate software system installation and monitor equipment functioning to ensure specifications are met. Design, develop and modify software systems, using scientific analysis and mathematical   models                       to                       predict                       and           measure outcome and consequences of design. Develop and direct software system testing and validation procedures, programming, and documentation. Analyze information to determine, recommend, and plan computer specifications and layouts, and peripheral equipment modifications. Supervise the work of programmers, technologists and technicians and other engineering and scientific personnel                               4.                           Computer Hardware Engineer (BPS- 17)                               1                               21-32                           Bachelor’s degree in Computer Hardware Engineering with 3 years of experience of Computer                 Hardware engineering in a reputable company Analyze information to determine, recommend, and plan layout, including type of computers and peripheral equipment modifications. Analyze user needs and recommend appropriate hardware. Build, test and modify product prototypes, using working models or theoretical models constructed using computer simulation. Confer with engineering staff and consult specifications to evaluate interface between hardware and software and operational and performance requirements of overall system. Design and develop computer hardware and support peripherals, including central processing units (CPUs), support logic, custom integrated circuits, and printers and disk drives. Evaluate factors such as reporting formats required, cost constraints, and need for security restrictions to determine hardware configuration. Monitor functioning of equipment and make necessary modifications to ensure system operates in conformance with specifications. Specify power supply requirements and configuration, drawing on system performance expectations and design specifications.           Store, retrieve, and manipulate data for analysis of system capabilities and requirements.                                       5.                                   Manufacturing Engineer (BPS- 17)                                       1.                                       21-32                                   Postgraduate degree in Manufacturing Engineering with 5 years of experience in manufacturing in a reputable company Evaluate manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators. Develop manufacturing processes by studying                      product                      requirements; researching, designing, modifying, and testing manufacturing methods and equipment; conferring with equipment vendors. Improve manufacturing efficiency by analyzing and planning work flow, space requirements, and equipment layout. Assure product and process quality by designing testing methods; testing finished- product and process capabilities; establishing standards; confirming manufacturing processes. Provide manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements. Prepare product and process reports by collecting, analyzing, and summarizing information and trends. . Provide manufacturing engineering information by answering questions and requests. Maintains product and company reputation by complying with government regulations. Keep equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special service. Maintain product and process data base by writing computer programs; entering data   Terms and Conditions: Applicants must be holding degree/s from HEC Recognized Institutions. Applications along with CV and copies of relevant scholastic documents as well as copy of domicile certificate should reach office of the assistant director (HR) at following address within 15 days of the publication of this advertisement. Incomplete documents and those received after due date will not be entertained. After technical test/screening, only shortlisted candidates will be called for interview. Pro-active and goal oriented individuals shall be given preference. Application submission date has been extended to 5th November 2018.   Assistant Director (HR) Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Topi-23470, KP, Pakistan   ...
Read more...

Join GIK Institute as Computer Engineer


Faculty of Computer Science and Engineering, GIK Institute of Engineering Sciences and Technology is seeking to fill vacant positions of Computer Engineers. The requirements for these positions are: A bachelor degree in Computer Science or Computer Engineering from PEC/HEC recognized institution is required. Other related majors may be considered as well. Lab conduct and delivery experience will be preferred. Please send your resume with transcripts of BS degree along with one recent passport size photograph before October 20, 2018 to:   Mr. Hamid-ur-Rehman PA to Dean Faculty of Computer Science and Engineering GIK Institute of Engineering Sciences and Technology Topi, Swabi e-mail: hamid@giki.edu.pk ...
Read more...

Join as Teacher (Physics)


  Applications are invited from well qualified persons for the position of Teacher (Physics) in the GIK College. Requisite qualifications and experience are appended below: “1st Class Master’s degree in Physics from a recognized university. Candidates having two years teaching experience in an English Medium School or College level of good rep ute will be given preference” GIK offers attractive salary packages and fringe benefits / facilities. Interested candidates should send their detailed CVs and a recent photograph to the HR Department by 3rd October, 2018. Application form placed on the website may be downloaded. Only shortlisted applicants will be called for interview.   Assistant Director (HR) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026 Ext: 2442, Fax No. 0938-281032  E-mail: dirhr@giki.edu.pk (GIK is an equal opportunity employer)   ...
Read more...

JOB OPPORTUNITIES


Applications are invited for the post of Machinist (Mechanical) in the GIK.  Requisite qualification and experience are as follows:   Machinist (Mechanical):  DAE from a Board of Technical Education in General Engineering (Machinist) with two years' post diploma experience.   Interested candidates should send their C.Vs/applications along with attested copies of educational documents and experience certificates, CNIC and a recent photograph to HR Department by 24th September, 2018. Application form placed on the website may be downloaded. Only shortlisted applicants will be called for test/interview.       Assistant Director (HR/Facilitation) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026, Fax No. 0938-281032 E-mail: dirhr@giki.edu.pk (GIK Institute is an equal opportunity employer)   ...
Read more...

On Campus Jobs for Undergraduate Students


The Incubator, GIK Institute intends to offer on campus job to students of all faculties to be placed in Incubation Centre. Applications are invited from the eligible and deserving students of the Institute in following areas Social Media Activities, Communication and daily operations Graphic Designing and Branding Skills Required: Well versed in communication and interpersonal skills, Confident Knowledge of  latest technologies Tactful Motivated Pro-active/ self- initiator Energetic Patience/ability to work under pressure Terms of Reference: Sophomore or third year undergraduate students with CGPA of 2.7/4.00 and above; The selected student(s) will be required to work for a maximum of 10 hours per week (or 20 hours during summer if not taking summer semester) as long as the following criteria are met; The student maintains good academics status; Student should remain available during the summer, if required; Satisfactory performance report submitted by the Dean/Head of Department concerned; The remuneration amount (Rs. 200/- per hour) will be paid to students in cash/ adjustment in Mess bills on monthly basis. Students hired on “On Campus Jobs” as will report to Director Incubation. Students will be allotted a shared office in Incubation Centre. At the beginning of each week, student must agree the schedule of work for that week with Director Incubation. Director Incubation will monitor the progress of students on the assigned tasks Office Assistant Mr. Nizar will maintain a record of the progress made by the students. He will also maintain a register of attendance to record the number of hours worked by students each day. At the end of each month, Mr. Nizar will send the attendance record to accounts for making payments to the students.   All interested students are advised to submit their applications along with updated CV’s through their Deans/HoD concerned to Director Incubation, latest by September 20th, 2018. The Incubator, GIK Institute intends to offer on campus job to students of all faculties to be placed in Incubation Centre. Applications are invited from the eligible and deserving students of the Institute in following areas Social Media Activities, Communication and daily operations Graphic Designing and Branding Skills Required: Well versed in communication and interpersonal skills, Confident Knowledge of  latest technologies Tactful Motivated Pro-active/ self- initiator Energetic Patience/ability to work under pressure Terms of Reference: Sophomore or third year undergraduate students with CGPA of 2.7/4.00 and above; The selected student(s) will be required to work for a maximum of 10 hours per week (or 20 hours during summer if not taking summer semester) as long as the following criteria are met; The student maintains good academics status; Student should remain available during the summer, if required; Satisfactory performance report submitted by the Dean/Head of Department concerned; The remuneration amount (Rs. 200/- per hour) will be paid to students in cash/ adjustment in Mess bills on monthly basis. Students hired on “On Campus Jobs” as will report to Director Incubation. Students will be allotted a shared office in Incubation Centre. At the beginning of each week, student must agree the schedule of work for that week with Director Incubation. Director Incubation will monitor the progress of students on the assigned tasks Office Assistant Mr. Nizar will maintain a record of the progress made by the students. He will also maintain a register of attendance to record the number of hours worked by students each day. At the end of each month, Mr. Nizar will send the attendance record to accounts for making payments to the students.   All interested students are advised to submit their applications along with updated CV’s through their Deans/HoD concerned to Director Incubation, latest by September 20th, 2018.   ...
Read more...

VACANCIES ANNOUNCEMENT


The Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, under a Government of Khyber Pakhtunkhwa sponsored project titled “Promoting Enterprises of Reverse Engineering” invites applications from the suitable male and female candidates (Khyber Pakhtunkhwa domiciled) for the posts mentioned below under the existing provincial project policy with following terms of reference:   S. # Name of the Post No. of Posts Age Limit Qualification/Experience Key Responsibilities       1.     Project Manager (Equivalent to BPS-18)       1       26-40 Postgraduate degree in Engineering                              (Preferably Mechanical)with 05 years relevant experience of project management in the area of engineering design and manufacturing                                      intensive projects from a reputable organization. Responsible for overall operation of the project To ensure the smooth functioning of the project and will be responsible to implement, monitor and evaluate the staff of the project To build and create new relationships with a variety of stakeholders                 2.             Mechanical Design Engineer (Equivalent to BPS-17)                 1                 21-32             Bachelor degree in Mechanical Engineering with3 years of experience of design and manufacturing in a reputable company. Design          and                     optimization                     of Mechanical components Analysis of mechanical systems, including Finite Element Analysis for structural ,fatigue, thermal, vibration and acoustics Analysis and specification of electro- mechanical and electro-hydraulic systems Development of manufacturing drawings in accordance with applicable standards Construct and oversee technicians in fabrication of development systems Interfaces with outside vendors for  component selection, manufacturing and assembly Read    and    interpret           blueprints,           technical drawings, schematic and computer-generated reports                       3.             Computer Software Engineer (BPS- 17)                 1.                 21-32           Bachelor degree in Computer Software Engineering with 3 years of experience of Computer Software Development in a reputable company Confer with systems analysts, engineers, programmers and others to design system and to obtain information on project limitations and capabilities, performance requirements and interfaces. Modify existing software to correct errors, allow it to adapt to new hardware, or to improve its performance. Analyze user needs and software requirements to determine feasibility of design within time and cost constraints. Consult with customers about software system design and maintenance. Coordinate software system installation and monitor equipment functioning to ensure specifications are met. Design, develop and modify software systems, using scientific analysis and mathematical   models                       to                       predict                       and               measure outcome and consequences of design. Develop and direct software system testing and validation procedures, programming, and documentation. Analyze information to determine, recommend, and plan computer specifications and layouts, and peripheral equipment modifications. Supervise the work of programmers, technologists and technicians and other engineering and scientific personnel                               4.                           Computer Hardware Engineer (BPS- 17)                               1                               21-32                           Bachelor’s degree in Computer Hardware Engineering with 3 years of experience of Computer                 Hardware engineering in a reputable company Analyze information to determine, recommend, and plan layout, including type of computers and peripheral equipment modifications. Analyze user needs and recommend appropriate hardware. Build, test and modify product prototypes, using working models or theoretical models constructed using computer simulation. Confer with engineering staff and consult specifications to evaluate interface between hardware and software and operational and performance requirements of overall system. Design and develop computer hardware and support peripherals, including central processing units (CPUs), support logic, custom integrated circuits, and printers and disk drives. Evaluate factors such as reporting formats required, cost constraints, and need for security restrictions to determine hardware configuration. Monitor functioning of equipment and make necessary modifications to ensure system operates in conformance with specifications. Specify power supply requirements and configuration, drawing on system performance expectations and design specifications.                         Store, retrieve, and manipulate data for analysis of system capabilities and requirements.                                       5.                                   Manufacturing Engineer (BPS- 17)                                       1.                                       21-32                                   Postgraduate degree in Manufacturing Engineering with 5 years of experience in manufacturing in a reputable company Evaluate manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators. Develop manufacturing processes by studying                      product                      requirements; researching, designing, modifying, and testing manufacturing methods and equipment; conferring with equipment vendors. Improve manufacturing efficiency by analyzing and planning work flow, space requirements, and equipment layout. Assure product and process quality by designing testing methods; testing finished- product and process capabilities; establishing standards; confirming manufacturing processes. Provide manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements. Prepare product and process reports by collecting, analyzing, and summarizing information and trends. . Provide manufacturing engineering information by answering questions and requests. Maintains product and company reputation by complying with government regulations. Keep equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special service. Maintain product and process data base by writing computer programs; entering data   Terms and Conditions: Applicants must be holding degree/s from HEC Recognized Institutions. Applications along with CV and copies of relevant scholastic documents as well as copy of domicile certificate should reach office of the assistant director (HR) at following address within 15 days of the publication of this advertisement. Incomplete documents and those received after due date will not be entertained. After technical test/screening, only shortlisted candidates will be called for interview. Pro-active and goal oriented individuals shall be given preference.   Assistant Director (HR) Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Topi-23640, Swabi, KP, Pakistan       ...
Read more...

TENDER NOTICE FOR SUPPLY OF FLUID MECHANICS LAB EQUIPMENT


Tender no. GIKI/PD/FMCE-661/18   Sealed bids (one envelope containing separate Technical & financial proposals) are invited from reputed firms/ suppliers for the   SUPPLY OF FLUID MECHANICS LAB EQUIPMENT  - Specifications and other terms and conditions are given in the tender document which can be downloaded from website (www.giki.edu.pk). Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 12:00 pm on 18th September, 2018. The proposals will be opened in the presence of bidders at 12:30 pm on the same day. The competent authority reserves the right to accept or reject any bid or all of the bids without assigning any reason. Deputy Director Procurement, Admin Block, GIK Institute, Topi, Swabi (KP)   Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk ...
Read more...

Tender Submission Notice


SUBMISSION DATE FOR TENDERS DUE BETWEEN 22nd to 24th August, 2018   Submission date for following tenders is changed to August 28th, 2018. Please note that your proposals for following mentioned tenders should reach us before 12:00hrs 28th August, 2018 Tender Notice No. GIKI/PD/WORKS-664/18 PURCHASE / SUPPLY  OF  TROLLEY FOR 1250 KVA TRANSFORMER   TENDER NOTICE for Tender no. GIKI/PD/FCE-663/18 FOR PURCHASE / SUPPLY OF COMPUTER SCIENCE & ENGINEERING LAB EQUIPMENTS (Components for AERIAL ROBOTICS LAB, FPGA (kits, Laptop, PC, Camera(s) & switch) Deputy Director Procurement, Admin Block, GIK Institute, Topi, Swabi (KP) Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk       ...
Read more...

Tender no. GIKI/PD/Furniture/649/18 for SUPPLY / PURCHASE OF FURNITURE & FIXTURES FOR NEW ACADEMIC BLOCK


TENDER NOTICE FOR PURCHASE OF FURNITURE & FIXTURES FOR NEW ACADEMIC BLOCK   Tender no. GIKI/PD/FURNITURE/649/18 Sealed bids (single stage two envelopes) according to KPPRA Procurement Rules 2014 are invited from pre-qualified suppliers for the procurement of furniture & Fixtures for new block academic block – being funded by the Govt. of KP. Detailed specifications and conditions are given in the tender document which can be downloaded from KPPRA and GIKI websites (www.giki.edu.pk) / (www.kppra.gov.pk) Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 12:00 pm on September 7th, 2018. The technical proposal will be opened in the presence of bidders at 12:30 pm on the same day. Deputy Director Procurement, GIK Institute, Topi (KP) Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk       ...
Read more...

EOI for Hiring of Consultant Firms and/or Individuals to arrange trainings for promoting Entrepreneurship in Khyber Pakhtunkhwa



Read more...

Join as Gynecologist, Manager Research O&D or Management Trainee


  Join as:   Gynecologist Senior Software Developer Manager Research Operations & Development Assistant Director (Finance) Management Trainees Accounts Officer   Applications are invited from well qualified persons for the positions of Gynaecologist, Senior Software Developer, Manager Research Operations & Development, Assistant Director (Finance), Management Trainees and Account Officer in the Institute.   Requisite qualifications and experience are appended below:     GYNAECOLOGIST DGO/MCPS (House Job in OBS/Gyne Must be registered with PMDC Islamabad. With at least 3 years experience in the relevant field.                     Or MBBS (House Job in OBS / Gyne) Must be registered with PMDC Islamabad. With at least 5 years’ experience in the relevant field till last date.   SENIOR SOFTWARE DEVELOPER   “B.S. in Computer Science/Software Engineering or relevant discipline (min. 18 years education) from a recognized university. M.S. qualification in the relevant field will be preferred. Four years’ relevant experience within higher education sector is preferred. This includes experience of developing software for academia and /or administration of Campus Management Systems or Enterprise Resource Planning software. Candidates must also have some experience in software project management or software project coordination. Technical skills – analyzing information, general programming, software design, software debugging, software documentation, software testing, problem solving, software development fundamentals, software development process, software requirements specifications and technical writing skills. General skills: excellent communication and presentation skills, flexibility, ability to resolve issues and to maintain positive relationships with users and team and ability to build own team. Profiles with successful projects will be given preference”.         Manager Research Operations & Development Criteria: “A full time Manager of Research Operation and Development will be responsible to oversee all aspects of the operation of the ORIC, which will also include the research administration (budgeting, auditing and accounting, human resources, management and maintenance of facilities and equipment, implementation of research contracts and human resources). The Manager will also be tasked to develop programs and activities to increase funding for research from all public and private sources. And also establish and maintain excellent relationships with donors and stakeholders, oversee proposal development and submission. The Research Office supports the externally and internally sponsored projects of the institution by providing pre- and post-award support to PIs and ensuring compliance with Temple and sponsor regulations. The person will work in close liaison with the board of advance studies and research or office of sponsored research”.   Responsibilities Develop, maintain, and communicate pre- and post-award administrative procedures for externally sponsored projects. Support faculty with grant proposal submissions in conjunction with sponsored projects administration (budget development; award documentation; administrative portions of proposals; internal approvals; monitor issues around effort, cost share, space needs, and tuition remission) Support faculty regarding contracts, progress reports, and other sponsor-related grant actions. Support faculty regarding post-award grant management, including projections, effort allocations and reporting, human resources, consultants, and close-outs. Coordinate internal and external reporting needs, including maintenance of HEI's database. Develop and maintain the award process web pages. Work with the administration to set goals and responsibilities within the research office and to monitor procedural efficiencies.  The Manager of Research Development provides overall vision to the institute research portfolio. The focus of this position is to foster collaborations among research faculty across departments and colleges, and to support the mentorship of junior faculty. Develop programs and activities that will increase funding for research from all public and private sources, establish and maintain excellent relationships with donors and stakeholders, oversee proposal development and submission Identify a programmatic strategy for research that promotes multidisciplinary collaboration within the university. Develop a structure for mentorship of junior faculty. Facilitate collaborations among faculty through identifying overlapping research interests and providing opportunities to communicate. Provide information about the grant process to faculty including study section procedures, interpreting reviews, and identifying appropriate funding mechanisms. Develop and maintain research cores and infrastructure within the institute including web pages, internal grant review procedures, and statistical support. Communicate with Development at both university and college levels about research initiatives and strengths. Eligibility and Experience:   Postgraduate degree from a quality institution in Management/Human Resources/Accounts & Finance or other related field. The ideal person should have six years relevant experience working for research and track record of management of research projects, organization or research donor agencies.   Assistant Director (Finance): CA (Inter)/ICMA (Graduate level) or Master’s Degree in Business Administration with specialization in Finance from a recognized University with 5 years’ experience of account or finance or audit or budget in a government or autonomous or reputed private institution. Should have good working knowledge of computer and excellent communication skills.   Management Trainee: MBA or equivalent with at least 16 years of education and excellent academic record with specialization in Human Resource Management, Accounting and Finance, Information Technology, Procurement, Marketing, General Business Management and allied disciplines. Computer skills are essentials (Age limit 25 years).   Accounts Officer: ICMA (Graduation level) /MBA (Finance) with 2 years relevant experience or B.B.A. (Hons) 4 years’ course with Accounting & Finance with 05 years’ experience of accounts/financial management or audit/budget in a government or reputed private institution.  Computer skills is essential.     Application Form (only for the applicants of Assistant Director (Finance), Management Trainees and Accounts Officer) placed on the website may be downloaded. Only shortlisted applicants will be called for interview.   Assistant Director (HR)                          GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa, Ph: 0938-281026 Ext: 2442 E-mail: dirhr@giki.edu.pk (GIK Institute is an equal opportunity employer)   ...
Read more...

Join GIK as Electronic Engineer


Vacant positions of Engineers are available in the Faculty of Engineering Sciences, GIK Institute, Topi    Criteria for applying: BS degree in Engineering Sciences / Electronic Engineering  Interested candidates may send their applications along with CVs on the following email address latest by Sunday, 12th August, 2018: shafiq@giki.edu.pk ...
Read more...

Tender Notice No.GIKI/PD/WORKS-664/18 PURCHASE / SUPPLY OF TROLLEY FOR 1250 KVA TRANSFORMER


TENDER NOTICE FOR PURCHASE / SUPPLY  OF  TROLLEY FOR 1250 KVA TRANSFORMER Tender no.  GIKI/PD/WORKS-664/18 Sealed bids - single envelope (Technical & financial proposals) are invited from reputed firms/ suppliers for the  SUPPLY  OF  TROLLEY FOR 1250 KVA TRANSFORMER  - Specifications and other terms and conditions are given in the tender document which can be downloaded from website (www.giki.edu.pk). Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 12:00 pm on 23rd August, 2018. The proposals will be opened in the presence of bidders at 12:30 pm on the same day. Deputy Director Procurement, Admin Block, GIK Institute, Topi, Swabi (KP) Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk        ...
Read more...

TENDER NOTICE FOR PURCHASE / SUPPLY OF COMPUTER SCIENCE & ENGINEERING LAB EQUIPMENT


TENDER NOTICE FOR PURCHASE / SUPPLY  OF COMPUTER SCIENCE & ENGINEERING LAB EQUIPMENTS (Components for AERIAL ROBOTICS LAB, FPGA (kits, Laptop, PC, Camera(s) & switch) Tender no. GIKI/PD/FCE-663/18 Sealed bids single envelope (Technical & commercial proposals) are invited from reputed firms/ suppliers for the PURCHASE / SUPPLY  OF COMPUTER SCIENCE & ENGINEERING LAB EQUIPMENTS (Components for AERIAL ROBOTICS LAB, FPGA (kits, Laptop, PC, Camera(s) & switch)- Specifications and other terms and conditions are given in the tender document which can be downloaded from website (www.giki.edu.pk). Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 12:00 pm on 22nd August, 2018. The proposals will be opened in the presence of bidders at 12:30 pm on the same day. Deputy Director Procurement, Admin Block, GIK Institute, Topi, Swabi (KP) Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk       ...
Read more...

Invitation Of Request For Proposal (RFP) For The Installation of 500 KW (Up to 2 MW) Grid Connected Solar PV Plant On Turn Key Basis



Read more...

TENDER NOTICE FOR PURCHASE / SUPPLY OF ULTRA-HIGH RESOLUTION ENVIRONMENTAL MODE FIELD-EMISSION SCANNING ELECTRON MICROSCOPE


TENDER NOTICE FOR PURCHASE / SUPPLY OF   ULTRA-HIGH RESOLUTION ENVIRONMENTAL MODE FIELD-EMISSION SCANNING ELECTRON MICROSCOPE (FE-ESEM) WITH EDS and EBSD ANALYTICAL SYSTEM Tender no. GIKI/PD/FMCE-661/18 Sealed bids (separate Technical & commercial proposals) are invited from reputed firms/ suppliers for the  PURCHASE / SUPPLY OF   ULTRA-HIGH RESOLUTION ENVIRONMENTAL MODE FIELD-EMISSION SCANNING ELECTRON MICROSCOPE (FE-ESEM) WITH EDS and EBSD ANALYTICAL SYSTEM - Specifications and other terms and conditions are given in the tender document which can be downloaded from website (www.giki.edu.pk). Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 12:00 pm on 9th August, 2018. The proposals will be opened in the presence of bidders at 12:30 pm on the same day. Deputy Director Procurement, Admin Block, GIK Institute, Topi, Swabi (KP) Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk   ...
Read more...

SCHEDULE OF REQUIREMENTS FOR PURCHASE OF INSULATION CHARACTERIZATION EQUIPMENT FOR HIGH VOLTAGE APPLICATIONS


Tender Serial No. GIKI/PD/FEE-660/18     GIK INSTITUTE OF ENGINEERING SCIENCES AND TECHNOLOGY, TOPI (PROCUREMENT Department) Reference GIKI tender advertisement (Tender # GIKI/PD/FEE-660/18) for PURCHASE OF INSULATION CHARACTERIZATION EQUIPMENT FOR HIGH VOLTAGE APPLICATIONS   SCHEDULE OF REQUIREMENTS FOR PURCHASE OF INSULATION CHARACTERIZATION EQUIPMENT FOR HIGH VOLTAGE APPLICATIONS   The delivery of services and supply will be made in 45 days after issuance of Purchase Order (without penalty) and with the prescribed penalty as per following schedule of requirement: - MODE OF PENALTY NO OF DAYS TOTAL DELIVERY PERIOD Without Penalty 45 days 45 days With Penalty @ 0.35 % per day for 10 days on the delayed completion of task 55 days (10 days after 55 days) 55 days (45+ 10)   PRICE SCHEDULE FOR THE GOODS IN PAK RUPEES: Name of Bidder: ________________________________________________________ Tender No: GIKI/PD/FEE-660/18 Purchase of EQUIPMENT FOR POWER SYSTEM LAB - tabulated as under: Tender No. Sr. No. Description Qty Unit Price (RS) Unit Price with 17% GST (RS) Total Cost including GST (RS) Bid Security (2% of the Total Cost) GIKI/PD/FEE-660/18 1         Insulation characterization equipment for high voltage applications 1           EA           Issued by:                                                                Deputy Director Procurement   Signature of the Bidder: ________________________________   Stamp of Bidder: ______________________________________     Note: In case of discrepancy between unit price and total, the unit price shall prevail. Annexure-A SPECIFICATIONS TENDER NO. (GIKI/PD/FEE-660/18)   PURCHASE OF Insulation characterization equipment for high voltage applications   Tender No. Sr. No. Item Description Qty Specification GIKI/PD/FEE-660/18   1   Insulation Characterization Equipment for High Voltage Applications The equipment comprises: Electrometer/HI Resistance MTR Tektronix Keithley/Model: 6517B or Equivalent Resistivity Test Fixture Tektronix Keithley/Model: 8009 Including Bottom Plate & Ground Strap or Equivalent IEEE 488 USB to GPIB Interface Adopter Tektronix Keithley/Model: KUSB-488B or Equivalent Software for High Resistance Measurement Application Part No. KickStart-HRMA 1 Measurements of conductivity of insulating materials are standardized and applied in practice. Despite of this, the measurements on highly resistive materials are not straightforward. Usually, a material sample of certain thickness is placed between metallic electrodes with known dimensions which are energized by applying a sufficiently high stabilized dc test voltage and a current through the sample is measured, which may be as low as a few pico-amperes. The high voltage (HV) laboratory, which is in the process of establishment, shall be used for studying and understanding various insulation materials.Therefore, the equipment proposed in this indent shall compliment the capabilities of the HV laboratory and will facilitate R&D activities pertaining to sophisticated characteristics of insulation systems. The experimental setup for conductivity measurement requires an electrometer with an inbuilttest voltage source and an ammeter that can measure current in the range of 1×10-15 20×10-3A. The electrometer needs to be equipped with a resistivity test fixture. The latter should have a pair of top and bottom electrodes between which a material sample can be placed for electrical characterization. It should also include a concentric ring electrode that can be electrically configured differently to measure either surface or volume current. Guarding must also be used to increase the accuracy of the measurements by providing a groundpath to the leakage currents. The electrodes are required to be made of good quality material (e.g. stainless steel) and should be enclosed inside a shielded box to minimize measurement errors and external disturbances. In addition to that, the electrodes should be covered with conductive rubber in order to maintain good contact with a sample with uniform pressure (from 6.894×103 Pa to 6.894×104 Pa depending on thickness of the material) on smooth parallel samples and even on hard material surfaces such as glass, epoxy, polyethylene, ceramic etc.Concerning the operating limits under cool and warm conditions, the test fixture should be capable of smoothly running at ambient temperature range from -10 °C to 80 °C.   List of required items of equipment The above mentioned specifications are best met by having the following items of equipment, manufactured by Tektronix Keithley- a leading manufacturers of high precision devices. Electrometer/HI Resistance MTR Model: 6517B Resistivity Test Fixture Model: 8009 Including Bottom Plate & Ground Strap   IEEE 488 USB to GPIB Interface Adopter Model: KUSB-488B Software for High Resistance Measurement Application Part No. KickStart-HRMA However, this is an open tender and other competitive manufacturers meeting the required specifications are encouraged to participate in the bidding process.             Deputy Director Procurement  GIK Institute, Topi   TENDER BIDS SUBMISSION & OPENING DATE AND TIME   TENDER NOTICE GIKI/PD/FEE-660/18   Purchase of Insulation characterization equipment for high voltage applications   Tender No. Description/Specification Date of Submission of Tender Documents Date Opening of Tender GIKI/PD/FEE-660/18 PURCHASE / SUPPLY OF Insulation characterization equipment for high voltage applications 03:00 pm on 3rd August, 2018 03:30 pm on 3rd August, 2018                                                                            Deputy Director Procurement GIK Institute, Topi GIK INSTITUTE OF ENGINEERING SCIENCES AND TECHNOLOGY, TOPI   TECHNICAL EVALUATION CRITERIA FOR TENDER NO. GIKI/PD/FEE-660/18 for Insulation characterization equipment for high voltage applications Specifications are available at Annex-A S. No. Item Name and Description Marks Maximum Marks 1 Past Performance/ Experience of the Bidder (Reg with GST/NTN) -- 5 1.1 1 - 3 year experience 1 -- 1.2 4 - 8 year experience 2 -- 1.3 9 - 15 year experience 2.5 -- 1.4 Above 15 5 -- 2 Relevant Experience -- 5 2.1 1 - 5 year experience 1.5 -- 2.2 6 - 10 year experience 2.5 -- 2.3 11 & above year experience 5 -- 3 Financial Position/ Status -- 5 3.1 Last sales tax paid Form 1 -- 3.2 Bank Certificate (satisfactory) 2 -- 3.3 Statement Worth (Min 2 m) 2 -- 4 After sale Services Available -- 5 5 Technical Evaluation of quoted items -- 40 5.1 Specification attached at Annex-A 20 -- 5.2 Literature in printed shape attached 2 -- 5.3 Reliability 2 -- 5.4 Delivery schedule as per need 5 -- 5.5 List of clients / where such equipment delivered 1.5 -- 5.6 Satisfactory letter from clients in favor of such equipment 1.5 -- 5.7 Guarantee / Warranty (as the case may be) 5 -- 5.8 Provision of training to concerned user 1.5 -- 5.9 Free Installation (if required) as per requirement 1.5 -- 6 Commercial Evaluation of quoted items -- 40 TOTAL   -- 100     Note: Please submit documents as per above mentioned criteria             Deputy Director Procurement GIK Institute, Topi   GIK INSTITUTE OF ENGINEERING SCIENCES AND TECHNOLOGY, TOPI           TENDER NO. GIKI/PD/FEE-660/18   TENDER DOCUMENT   F.O.R. and/or CFR BASIS     TENDER FEE NON-REFUNDABLE Rs. 1000/-     PROCUREMENT DEPARTMENT Ph: 0938-281026 EXT (2213) Fax: 0938-281045 Email: shahzebali@giki.edu.pk Web: www.giki.edu.pk           GIK INSTITUTE OF ENGINEERING SCIENCES AND TECHNOLOGY, TOPI PROCUREMENT DEPARTMENT INTRODUCTION:   GIK INSTITUTE OF ENGINEERING SCIENCES AND TECHNOLOGY, TOPI, having (hereinafter referred to as the Purchaser) invites sealed bids from eligible bidder(s) under Single Stage Two envelop bidding system (i.e. Technical and Financial Bids in separate envelops) for supply and delivery of goods, materials, equipment and/or services described in the Schedule of Requirement. All the Annexure from “C” to “L” are integral part of the Tender Document and its compliance is mandatory and must be signed and stamped be the vendor/supplier and attached with the relevant proposal, otherwise bids will be rejected.   The Technical Bids will be opened first on the date mentioned in Tender Notice. The financial bids of the only technically qualified bidder(s) will be opened publicly. The Technical Evaluation Report will be published on GIK INSTITUTE, website before financial bid opening.   INSTRUCTIONS TO BIDDER(S):   The bidder(s) shall bring samples of equipment and bear all cost associated with the preparation and delivery of their bids, and the Purchaser will in no case be responsible or liable for those costs.   In case of any doubt as to the meaning of any portion of the Specifications or other Terms and Conditions, bidder(s) may seek clarification of the same in writing, but not later than 5 days prior to deadline for submission of bid(s) prescribed by the Purchaser.   At any time prior to the deadline for submission of bids, a modification in bidding document in the form of an addendum can be issued in response to a clarification requested by a respective bidder(s) or even whenever the Purchaser considers it beneficial to issue such a clarification and/or amendment to all bidder(s). The clarification/amendment issued (in general) shall be placed on the GIK INSTITUTE web site for the intimation to all the prospective bidder(s).   Bidder(s) are required to submit their bid(s), which will bear words “CONFIDENTIAL” and for TENDER NO. GIKI/PD/FEE-660/18 as per Tender Notice.   The Purchaser will not take any responsibility for collecting the bids from any Agency.   The Purchaser reserves the right to increase or decrease the quantities or may cancel any or all items shown in the Schedule of Requirement without assigning any reason thereof.   The Purchaser reserves the right to have the items inspected by its own representative, or by 3rd party at its own cost (if required).   It must be indicated in the offer that the Bid fully conforms to Technical Specifications and Terms and Conditions of the Tender.   The Purchaser reserves the right to accept or reject any bid and to annul the bidding process and reject all the bids at any time prior to award of Purchase Order without thereby incurring any liability to the affected bidder(s) or any obligation there under. However, GIK Institute shall upon request communicate to any bidder(s) who submitted a bid, the grounds for its rejection, but it is not required to justify those grounds.   Unsolicited advice/clarifications and personal approaches by the bidder(s) at any stage of evaluation are strictly prohibited and shall lead to disqualification.     The bidder(s) are expected to examine all instructions, forms, terms and specifications in the Bidding Documents. Failure to furnish all information required by the Bidding Documents or submission of a bid not substantially responsive to Bidding Documents in all respect will result in the rejection of the bid(s).   All prospective bidder(s) are advised to read carefully all terms & conditions mentioned in the Tender Documents prior to filling / submission of their Bid.   Black listing procedure of the Company is attached as Appendix-L. The bidders, contractors, suppliers, agents, consultants, partnership or firms shall be dealt accordingly.   BID PRICES:   Firm bid prices shall be quoted in Annexure-B duly filled-in, stamped and signed by authorized representative of Bidder(s). Prices must be quoted as per format of Schedule of Requirement (SOR).   Bidding Forms and Bid Summery Sheets from Annexure – “C” to “F” and “H” to “K” must also be duly filled-in, stamped and signed by authorized representative of bidder(s).   Prices Should be quoted in Pakistani currency inclusive of all taxes and duties and CFR Basis indicating unit price and total bid prices. GST must be quoted separately along with copy of GST Certificate. Conditional bid / bid having any price adjustment formula will be rejected.   Prices must be quoted including all charges like handling, loading, transportation and un-loading, Octroi and Zila Tax etc. for delivery of material at Purchaser’s stores located at required delivery location.   Quoted prices will be valid for 120 days from the opening date of the Financial Bid.   Technical brochure/literature confirming Size, Brand & Country of Origin of quoted items/material must be attached with the Technical Bid (where deemed necessary).   Any Bid not confirming to Clause 2.1 to 2.6 shall be rejected without any right of appeal.     Discount (if any) shall only be entertained on Schedule of Requirement of Bidding Document (Financial Proposal). If the discount is mentioned elsewhere in the bid, the same shall not be entertained.   Tender submitted without Tender Fee Rs 1,000/- (in shape of challan form/ pay order/Demand Draft) & earnest money CDR should be rejected at the time of opening of Tender. Earnest money & challan form will be submitted against each Tender separately.   BID SECURITY MONEY:   The sealed bids complete in all respect must reach in the office of Director Procurement GIK Institute along with Bid Security Money 2% of the total cost in the name of GIK INSTITUTE OF ENGINEERING SCIENCES AND TECHNOLOGY, TOPI in  shape of CDR to be attached with financial offer.     Short Bid Security Money or Crossed Cheque as Bid Security Money is not acceptable.   The Bid Security Money of un-successful bidder(s) will be returned after award of Purchase Order to successful bidder(s). The Bid Security Money of successful bidder(s) will be discharged / returned upon bidder(s) furnishing the executing the order/contract (Subject to the satisfactory report without any objection from the end user).    The Bid Security Money of bidder(s) whose bid is rejected under Clause 2.7 will be returned forth-with.   The Bid Security Money shall be forfeited:   If a bidder withdraws its bid during the period of bid validity. In case of successful bidder, who fails (a) to sign the contract; (b) to furnish performance security (if any).     SEALING AND MARKING OF BIDS:   The bidder(s) shall furnish Technical & Financial Bid(s) in two separate sealed envelopes.   Technical Bids will be opened first.   Earnest money as mentioned in Press Tender Notice must be enclosed with Financial Bid.   Only Financial Bid(s) of Technically responsive bidder(s) will be opened publicly.   Financial Bids of technically non responsive bidder(s) will be returned after award of Purchase Order to successful bidder(s). The bid shall be submitted in a sealed envelope marked as under: PROCUREMENT Depatment GIK INSTITUTE OF ENGINEERING SCIENCES AND TECHNOLOGY, TOPI   The envelope shall also bear the word “CONFIDENTIAL” and following identifications:-   TENDER NO. GIKI/PD/FEE-660/18 DON’T OPEN BEFORE (AS PER SCHEDULE MENTIONED IN THE TENDER NOTICE/SOR) TECHNICAL/FINANCIAL BID(s) (INDICATE ONE ON EACH ENVELOPE)                     If the envelope is not marked, as instructed above, the Purchaser will assume no responsibility for the misplacement or premature opening of bid(s).   DEADLINE FOR SUBMISSION OF BIDS:   The bids must be delivered at the Procurement Department, GIK Institute, Topi on or before as per schedule mentioned in Press Tender Notice and the same will be opened accordingly.   LATE BIDS:   Any bid received by the Purchaser after the prescribed deadline for submission of bids mentioned in Press Tender Notice will not be accepted and returned un-opened to the bidder(s).   BID OPENING:   The purchaser will open the Technical Bid, in the presence of bidder’s representative(s) who may chose to attend on date, time and location mentioned above.   The bidder(s) names, bid prices including bid price modification and bid withdrawals, if any, will be announced at the time of financial bid opening.   The Purchaser will examine the bids to determine whether they are complete, no computational errors have been made, the required sureties have been furnished, documents have been properly signed, and the bids are generally in order.   Arithmetical errors found will be corrected as follows:   Where there is a discrepancy between amount in figures and word, the amount in word will prevail.   Where there is a discrepancy between the unit price and the total amount derive from the multiplication of the unit price and the quantity, the unit price as quoted will govern, unless there is an obvious gross arithmetical error in unit price, in which event, the extended amount quoted would prevail.   In case the due date of bids opening falls on a holiday, the bids shall be opened on the next working day.   DETERMINATION OF RESPONSIVENESS:   After opening of the bids, the purchaser will determine whether each bid is substantially responsive to the requirements of the bidding documents.   For the purpose of this clause, a substantially responsive bid is one, which conforms to all the terms and conditions of the bidding documents without material deviation. A material deviation is one which means in-consistent with the bidding document, affects in any substantial way the scope, quality or prescribed delivery schedule or which limits in any substantial way, the Purchaser’s right or the bidder’s obligation under the contract.   A bid determined to be a non-responsive will be rejected by the purchaser and shall not subsequently be made responsive by the bidder(s) by correction of the non-conformity.   The purchaser may waive any minor deviation non-conformity or irregularity in a bid, which does not constitute a material deviation, provided that the waiver does not prejudice or affect the relative standing order of other bidder(s).   To assist in determining a bid’s responsiveness the bidder(s) may be asked for a clarification of his bid. The bidder(s) is not permitted, however, to change bid price or substance of his bid. The bidder(s) may lodge a written complaint for redressed of their grievances and disputes to Dispute Resolution Committee within fifteen days of the placement of the Technical Evaluation report on the web.   ISSUANCE OF PURCHASE ORDER (PO):   The Purchaser will issue Purchase Order to the successful bidder(s) whose bid is determined to be the best evaluated bid.   PAYMENT:   Payment will be made as follows after inspection and acceptance of goods, materials and equipment etc:   100% Payment after delivery subject to acceptance (no advance payment will be made)   Payment Against Delivery Part Delivery Part Payment   DELIVERY SCHEDULE:   Delivery of required material against this tender is to be completed as soon as possible from the date of receipt of firm Purchase Order.   EXTENSION IN THE DELIVERY PERIOD:   Delivery of the goods shall be made by the supplier in accordance with the delivery schedule given in Purchase Order.   The supplier may claim extension of the time limits as set forth in the Purchase Order in case of:-   Changes in the specifications of goods, material & equipment by the Purchaser. Delay in provision of clarifications regarding material, drawings and services by the Purchaser.   Force Majeure pursuant to Clause # 15.   Justified reasons subject to a written request high-lighting the same within a period of seven working days prior to expiry of delivery period mentioned in Purchase Order.   It should be noted that a request for extension in delivery period shall be considered only if the supplier agrees in writing to pay any increase in taxes or any other charges levied by the Government during the extended delivery period. Purchaser shall not bear any additional price increase during the extended period.   In case of extension in delivery period, the supplier will extend validity of Performance Bond accordingly at his cost.   If the supplier fails to supply the ordered material for any reason, within stipulated time, the Performance Bond shall be forfeited and material shall be purchased from elsewhere at his risk and cost.   LIQUIDATED DAMAGES:   If you fail to supply the material in the above specified period, GIK Institute reserves the right to blacklist you for future business or forfeit the security money or impose penalty @ 0.35% per day of the contract value or may impose any other financial penalty as deemed fit.   Even after imposition of LDs, if the supplier fails to materialize the delivery (material and or services); the Purchaser reserves the right to cancel Purchase order/contract and to forfeit the earnest money (if applicable) after intimating the supplier for such cancellation / forfeiture.   FORCE MAJEURE:   The supplier shall not be liable for penalty for delay in delivery of ordered goods, if, and to the extent delay in delivery or other failure to perform his obligation under the Purchase Order, of being the result of occurrence of Force Majeure i.e. causes such as natural calamities, war, civil disturbance, military action, fire as well as other circumstance proved to the satisfaction of the Purchaser to be beyond the reasonable control of the supplier, which may impede the fulfillment of the obligations under the Purchase Order.   The supplier shall notify the Purchaser promptly of the occurrence of Force Majeure and submit his case in writing within 07 days of such occurrence.   If any of the party is prevented to fulfill its assumed obligations by Force Majeure of constant duration of at least one month, the party shall meet for negotiation. If no satisfactory agreement is reached within a period of two months from the Commencement of the Force Majeure conditions, either party shall have the right to cancel the Purchase Order with immediate effect.   INSPECTION AND TEST: The Purchaser’s representative(s) shall have the right to inspect and/or test the goods to confirm their conformity with respect to specifications mentioned in the Purchase Order. The representative of Procurement Cell will witness the inspection (where so required).   Should any inspected or tested goods fail to conform to the specifications the purchaser shall reject them and supplier shall replace the rejected goods. All costs incurred on such replacement shall be entirely born by the supplier.   Rejected material shall be moved / replaced by the supplier within 07 days from the receipt of letter/fax issued by the Procurement Department. The supplier shall be liable for the storage charges @ ½% (half percent) of the cost of rejected material on every day basis, if the same is not removed within seven days.   Acceptance/rejection of the material by 3rd party (where required) will be final and binding on both the parties.   WARRANTY:   The supplier shall warrant that all goods supplied under Purchase Order shall be according to specifications given in Purchase Order and approved drawings/design etc. Any deviation in material, drawing/design (where applicable) will be replaced by the supplier at his cost.   The Purchaser shall promptly notify the supplier in writing, of any claims arising under this warranty.   The supplier will invariably provide warranty/guarantee of spare and consumables.   QUALIFICATION OF SELECTED BIDDER(S)S:   The Purchaser will determine to its satisfaction whether the bidder(s) selected as having submitted the lowest evaluated, technically responsive bid qualifies to satisfactorily perform the order.   The determination will take into account the bidder(s) financial, technical & production capabilities, availability of items ordered for. The bidder(s) shall provide necessary documents as proof along with the bid.   Any affirmative determination will be a pre-requisite for award of the Purchase Order to the bidder(s). A negative determination will result in rejection of the bid.   The Purchaser reserves the right at the time of award of order to increase or decrease to a reasonable extent in the quantity of goods specified in the Tender Document without any change in price or other terms and conditions.   You are encouraged to inform Procurement Department on the following addresses/ contacts, in case where any GIK Institute employee ask for any type of favor whether monetary or in kind:-     DESIGNATION ADDRESS TEL # FAX # E. MAIL  Director Procurement Ghulam Ishaq Khan Institute, Topi. 0938-281026 (Ex: 2340) 0939-281045 tenders@giki.edu.pk ANNEXURE - C     BIDDING FORM (TECHNICAL BID)   Deputy Director Procurement GIK Institute of Engineering Sciences and Technology, Topi     Gentlemen,   Having examined the Bidding Documents including the specifications, the receipt of which is hereby acknowledged, we the undersigned offer to supply & deliver «Description» in conformity with drawings, specifications of goods and conditions of Tender Document.   We undertake if our bid is accepted, to commence delivery within 30 days (Please specify days) from the date of receipt of your firm Purchase Order.   If our bid is accepted, we will provide the Performance Bond equal to 10% of the Purchase Order excluding GST, for due performance of the purchase order.   We agree to abide by all the terms & conditions of the tender for the period of 120 days from the opening of financial proposal & it shall remain binding upon us and may be accepted at any time before the expiry of that period or any extension thereof agreed by us.   Until a formal Purchase Order is placed, this bid, together with your written acceptance thereof, shall constitute a binding contract between us. We under-stand that you are not bound to accept the lowest priced or any bid you may receive.   Dated this ______________________ day of _______________ 20_____     (Signature) (In the capacity of)   Duly authorized to sign Bid for and on behalf of ______________________________________     (Signature of Witness)   Name: - __________________________________ Address: - ________________________________ ________________________________   ANNEXURE -D   BIDDING FORM (FINANCIAL BID)   Deputy Director Procurement GIK Institute of Engineering Sciences and Technology, Topi     Gentlemen,   Having examined the Bidding Documents including the specifications, the receipt of which is hereby acknowledged, we the undersigned offer to supply & deliver «Description» in conformity with drawings, specifications of goods and conditions of Tender for the sum of Rs.______________________ (Total bid amount in words) (inclusive of all taxes) or such other sum as may be ascertained in accordance with the said conditions.   Until a formal Purchase Order is placed, this bid, together with your written acceptance thereof, shall constitute a binding contract between us. We understand that you are not bound to accept the lowest priced or any bid you may receive.   Dated this ____________________ day of ____________ 20_____             (Signature) (In the capacity of)   Duly authorized to sign Bid for and on behalf of ______________________________________           (Signature of Witness)   Name: - __________________________________ Address: - ________________________________ ________________________________     ANNEXURE – E BID SUMMARY SHEET   TENDER NO. GIKI/PD/FEE-660/18   (TO BE ATTACHED WITH TECHNICAL BID)     Bidder Name Address, Phone & Fax No E-mail address           Manufacturer Name & Country of Origin:           Items Quoted:(give serial no. only):         Price Validity:     Offered Delivery Period:     GST Registration No:     Bidding form (Annexure-C attached with Technical bid: Yes (  )   No (  )   Any Deviation:                   Signature ______________________   Name & Designation__________________________     ANNEXURE – F   BID SUMMARY SHEET   TENDER NO. GIKI/PD/FEE-660/18    (TO BE ATTACHED WITH FINANCIAL BID)   1. Bidder Name ______________________________________   Address, Phone & Fax NO.________________________________   E-mail address < ...
Read more...

TENDER NOTICE FOR PURCHASE / SUPPLY OF INSULATION CHARACTERIZATION EQUIPMENT FOR HIGH VOLTAGE APPLICATIONS


TENDER NOTICE FOR PURCHASE / SUPPLY OF  INSULATION CHARACTERIZATION EQUIPMENT FOR HIGH VOLTAGE APPLICATIONS Tender no. GIKI/PD/FEE-660/18 Sealed bids single envelope (Technical & commercial proposals) are invited from reputed firms/ suppliers for the  PURCHASE / SUPPLY OF  INSULATION CHARACTERIZATION EQUIPMENT FOR HIGH VOLTAGE APPLICATIONS   - Specifications and other terms and conditions are given in the tender document which can be downloaded from website (www.giki.edu.pk). Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on 3rd August, 2018. The proposals will be opened in the presence of bidders at 03:30 pm on the same day. Deputy Director Procurement, Admin Block, GIK Institute, Topi, Swabi (KP) Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk     ...
Read more...

SCHEDULE OF REQUIREMENTS FOR MANUFACTURING OF MECHANICAL HARDWARE OF PROTOTYPES OF INDUSTRIAL SCALE MACHINE TOOLS


Tender Serial No. GIKI/PD/FME-644/18     GIK INSTITUTE OF ENGINEERING SCIENCES AND TECHNOLOGY, TOPI (PROCUREMENT Department)     SCHEDULE OF REQUIREMENTS FOR MANUFACTURING OF MECHANICAL HARDWARE OF PROTOTYPES OF INDUSTRIAL SCALE MACHINE TOOLS   The delivery of services and supply will be made in 60days after issuance of Purchase Order (without penalty) and with the prescribed penalty as per following schedule of requirement: - MODE OF PENALTY NO OF DAYS TOTAL DELIVERY PERIOD Without Penalty 60days 60days With Penalty @ 0.35 % per day for 10 days on the delayed completion of task 70 days (10 days after 70 days) 70 days (60+ 10)   PRICE SCHEDULE FOR THE GOODS IN PAK RUPEES: Name of Bidder: ________________________________________________________ Tender No: GIKI/PD/FME-644/18 MANUFACTURING OF MAECHANICAL HARDWARE OF PROTOTYPES OF INDUSTRIAL SCALE MACHINE TOOLS- tabulated as under: Tender No. Sr. No. Description/Specification Qty Unit Price (RS) Unit Price with 17% GST (RS) Total Cost including GST (RS) Bid Security (2% of the Total Cost) GIKI/PD/FME-644/18 1 Prototype of 5-axis CNC milling machine 01         2 Prototype of Electro Hydro Dynamic Jet Printer 01         3 Prototype of Selective Laser Sintering Machine 01         4 Prototype of Binder jet Printer 01         5. Prototype of 3D Scanner 01                         Issued by:        Director Procurement       Signature of the Bidder: ________________________________   Stamp of Bidder: ______________________________________     Note: In case of discrepancy between unit price and total, the unit price shall prevail. Annexure-A SPECIFICATIONS TENDER NO. (GIKI/PD/FME-644/18) MANUFACTURING OF MECHANICAL HARDWARE OF PROTOYPES OF STRATEGIC & NON-STRATEGIC MACHINES Tender No. Sr. No. Description/Specification can be downloaded from below URL. Qty GIKI/PD/FME-644/18   1 Prototype of 5-axis CNC milling machine   Mechanical Bill of materials: https://drive.google.com/open?id=1CPv8zqKMPpiWnnKMa8o4V1EHMI1RSNL1 Models and Drawings: https://drive.google.com/open?id=1LDJ6unJe_Kik3xI4LyY1xUyLNvUb-nOX   01 2 Prototype of Electro Hydro Dynamic Jet Printer   Mechanical Bill of materials: https://drive.google.com/open?id=1XvIC18dFX-FnU295-aV5P1KKIDNb6hk4 Models and Drawings: https://drive.google.com/open?id=1H9q8Ute_b5R2T-YsPu8aqwEtwyLp0S0S   01 3 Prototype of Selective Laser Sintering Machine   Mechanical Bill of materials: https://drive.google.com/open?id=1-8WdpV2hyUpD3E9YEkUBynHQ-WNFB-OC Models and Drawings: https://drive.google.com/open?id=1LwC_l63-BQa0iPeYQ4gL_89MyclSK10e   01 4 Prototype of Binder jet Printer   Mechanical Bill of materials: https://drive.google.com/open?id=1b2SkoFD7ruDs1bvvQ7cjH8e5stCwsLkl Models and Drawings: https://drive.google.com/open?id=1wQ_Wmtda3y_ZJPuKwucKtA1KuaYqkBCs   01     5 Prototype of 3D Scanner   Mechanical Bill of materials: https://drive.google.com/open?id=1guKgQNwbQETObSwgembaecxUrXlWR-pX Models and Drawings: https://drive.google.com/open?id=1uTWt8LBHeJXs8il7cOoKeatrVJn_EKNC   01       Director Procurement  GIK Institute, Topi   TENDER BIDS SUBMISSION & OPENING DATE AND TIME   TENDER NOTICEGIKI/PD/FME-644/18   MANUFACTURING OF MECHANICAL HARDWARE OF PROTOYPES OF INDUSTRIAL SCALE MACHINE TOOLS   Tender No. Description/Specification Date of Submission of Tender Documents Date Opening of Tender GIKI/PD/FME-644/18 MANUFACTURING OF MECHANICAL HARDWARE OF PROTOYPES OF INDUSTRIAL SCALE MACHINE TOOLS(Drawings & Models can downloaded from URL mentioned in Annex-A)   03:00 pm on 1stAugust, 2018 03:30 pm on 1st August, 2018                                                                            Director Procurement GIK Institute, Topi GIK INSTITUTE OF ENGINEERING SCIENCES AND TECHNOLOGY, TOPI   TECHNICAL EVALUATION CRITERIA FOR QUALIFIED BIDDERS FOR MANUFACTURING OF MECHANICAL HARDWARE OF PROTOTYPES FOR INDUSTRIAL SCALE MACHINE TOOLS. S. No. Item Name and Description Marks Maximum Marks 1 Past Performance/ Experience of the Bidder (Reg with GST/NTN) -- 10 1.1 1 - 3 year experience 2 -- 1.2 4 - 8 year experience 2.5 -- 1.3 9 - 15 year experience 2.5 -- 1.4 Above 15 3 -- 2 Relevant Experience -- 20 2.1 1 - 5 year experience 3 -- 2.2 6 - 10 year experience 4 -- 2.3 11 & above year experience 5 -- 2.4 Organizational Profile 4   2.5 Existing Capabilities(Human Resource) 4   3 Financial Position/ Legal Status -- 10 3.1 Last sales tax paid Form 2 -- 3.2 Bank Certificate (satisfactory) 2 -- 3.3 Statement Worth (Min 2 m) 3 -- 3.4 Legal Status along with proof of registration 2   3.5 External Auditor Report 1   4 After sale Services Available -- 05 5 Technical Evaluation Parameters -- 20 5.1 Work Capability according to Specification 4   5.2 Literature in printed shape attached 2   5.3 Reliability of the equipment 2   5.4 General Record of Delivery schedule as per need 1   5.5 List of clients / where such equipment delivered and References 3   5.6 Satisfactory letter from clients in favor of such equipment 2   5.7 Guarantee / Warranty (as the case may be) 3   5.8 Provision of training to concerned user- Previous record 2   5.9 Free Installation (if required) as per requirement 1   6 Manufacturing Facility (Engineering Equipment & Machinery)   35 6.1 Casting Capability 5   6.2 Welding Capability 4   6.3 Metal Cutting Capability 7   6.4 Metal Working Capability 6   6.5 Surface Treatment 4   6.6 Inspection Facility 5   6.7 Assembly Facility 4   TOTAL   -- 100     Note: Please submit documents as per above mentioned criteria             Director Procurement GIK Institute, Topi   GIK INSTITUTE OF ENGINEERING SCIENCES AND TECHNOLOGY, TOPI           TENDER NO. GIKI/PD/FME-644/18   TENDER DOCUMENT   F.O.R. BASIS     TENDER FEE NON-REFUNDABLE Rs. 1000/-     PROCUREMENT DEPARTMENT Ph: 0938-281026 EXT (2213) Fax: 0938-281045 Email:ahmed.raza@giki.edu.pk Web: www.giki.edu.pk           GIK INSTITUTE OF ENGINEERING SCIENCES AND TECHNOLOGY, TOPI PROCUREMENT DEPARTMENT INTRODUCTION:   GIK INSTITUTE OF ENGINEERING SCIENCES AND TECHNOLOGY, TOPI, having (hereinafter referred to as the Purchaser) invites sealed bids from eligible bidder(s) under Single Stage Two envelop bidding system (i.e. Technical and Financial Bids in separate envelops) for supply and delivery of goods, materials, equipment and/or services described in the Schedule of Requirement. All the Annexure from “C” to “L” are integral part of the Tender Document and its compliance is mandatory and must be signed and stamped be the vendor/supplier and attached with the relevant proposal, otherwise bids will be rejected.   The Technical Bids will be opened first on the date mentioned in Tender Notice. Thefinancial bids of the only technically qualified bidder(s) will be opened publicly. The Technical Evaluation Report will be published on GIK INSTITUTE, website before financial bid opening.   INSTRUCTIONS TO BIDDER(S):   The bidder(s) shall manufacture all machines according to the drawing and models and bring also samples and bear all cost associated with the preparation and delivery of their bids, and the Purchaser will in no case be responsible or liable for those costs.   In case of any doubt as to the meaning of any portion of the Specifications or other Terms and Conditions, bidder(s) may seek clarification of the same in writing, but not later than 5 days prior to deadline for submission of bid(s) prescribed by the Purchaser.   At any time prior to the deadline for submission of bids, a modification in bidding document in the form of an addendum can be issued in response to a clarification requested by a respective bidder(s) or even whenever the Purchaser considers it beneficial to issue such a clarification and/or amendment to all bidder(s). The clarification/amendment issued (in general) shall be placed on the GIK INSTITUTE web site for the intimation to all the prospective bidder(s).   Bidder(s) are required to submit their bid(s), which will bear words “CONFIDENTIAL” and for TENDER NO. GIKI/PD/FME-644/18as per Tender Notice.   The Purchaser will not take any responsibility for collecting the bids from any Agency.   The Purchaser reserves the right to increase or decrease the quantities or may cancel any or all items shown in the Schedule of Requirement without assigning any reason thereof.   The Purchaser reserves the right to have the items inspected by its own representative, or by 3rd party at its own cost (if required).   It must be indicated in the offer that the Bid fully conforms to Technical Specifications and Terms and Conditions of the Tender.   The Purchaser reserves the right to accept or reject any bid and to annul the bidding process and reject all the bids at any time prior to award of Purchase Order without thereby incurring any liability to the affected bidder(s) or any obligation there under. However, GIK Institute shall upon request communicate to any bidder(s) who submitted a bid, the grounds for its rejection, but it is not required to justify those grounds.   Unsolicited advice/clarifications and personal approaches by the bidder(s) at any stage of evaluation are strictly prohibited and shall lead to disqualification.     The bidder(s) are expected to examine all instructions, forms, terms and specifications in the Bidding Documents. Failure to furnish all information required by the Bidding Documents or submission of a bid not substantially responsive to Bidding Documents in all respect will result in the rejection of the bid(s).   All prospective bidder(s) are advised to read carefully all terms & conditions mentioned in the Tender Documents prior to filling / submission of their Bid.   Black listing procedure of the Company is attached as Appendix-L. The bidders, contractors, suppliers, agents, consultants, partnership or firms shall be dealt accordingly.   BID PRICES:   Firm bid prices shall be quoted in Annexure-B duly filled-in, stamped and signed by authorized representative of Bidder(s). Prices must be quoted as per format of Schedule of Requirement (SOR).   Bidding Forms and Bid Summery Sheets from Annexure – “C” to “F” and “H” to “K” must also be duly filled-in, stamped and signed by authorized representative of bidder(s).   Prices must be quoted in Pakistani currency inclusive of all taxes and duties, indicating unit price and total bid prices. GST must be quoted separately along with copy of GST Certificate. Bids offering prices in foreign currency will be rejected. Conditional bid / bid having any price adjustment formula will be rejected.   Prices must be quoted including all charges like handling, loading, transportation and un-loading, Octroi and Zila Tax etc. for delivery of material at Purchaser’s stores located at required delivery location.   Quoted prices will be valid for 120 days from the opening date of the Financial Bid.   Technical brochure/literature confirming Size, Brand & Country of Origin of quoted items/material must be attached with the Technical Bid (where deemed necessary).   Any Bid not confirming to Clause 2.1 to 2.6 shall be rejected without any right of appeal.     Discount (if any) shall only be entertained on Schedule of Requirement of Bidding Document (Financial Proposal). If the discount is mentioned elsewhere in the bid, the same shall not be entertained.   Tender submitted without Tender Fee Rs 1,000/- (in shape of challan form/ pay order/Demand Draft) & earnest money CDR should be rejected at the time of opening of Tender. Earnest money & challan form will be submitted against each Tender separately.   BID SECURITY MONEY:   The sealed bids complete in all respect must reach in the office of Director Procurement GIK Institutealong withBid Security Money 2% of the total cost in the name of GIK INSTITUTE OF ENGINEERING SCIENCES AND TECHNOLOGY, TOPIin  shape of CDR to be attached with financial offer.     Short Bid Security Money or Crossed Cheque as Bid Security Money is not acceptable.   The Bid Security Money of un-successful bidder(s) will be returned after award of Purchase Order to successful bidder(s). The Bid Security Money of successful bidder(s) will be discharged / returned upon bidder(s) furnishing the executing the order/contract (Subject to the satisfactory report without any objection from the end user).    The Bid Security Money of bidder(s) whose bid is rejected under Clause 2.7 will be returned forth-with.   The Bid Security Money shall be forfeited:   If a bidder withdraws its bid during the period of bid validity. In case of successful bidder, who fails (a) to sign the contract; (b) to furnish performance security (if any).     SEALING AND MARKING OF BIDS:   The bidder(s) shall furnish Technical & Financial Bid(s) in two separate sealed envelopes.   Technical Bids will be opened first.   Earnest money as mentioned in Press Tender Notice must be enclosed with Financial Bid.   Only Financial Bid(s) of Technically responsive bidder(s) will be opened publicly.   Financial Bids of technically non responsive bidder(s) will be returned after award of Purchase Order to successful bidder(s). The bid shall be submitted in a sealed envelope marked as under: PROCUREMENT Depatment GIK INSTITUTE OF ENGINEERING SCIENCES AND TECHNOLOGY, TOPI   The envelope shall also bear the word “CONFIDENTIAL” and following identifications:-   TENDER NO. GIKI/PD/FME-644/18 DON’T OPEN BEFORE (AS PER SCHEDULE MENTIONED IN THE TENDER NOTICE/SOR)TECHNICAL/FINANCIAL BID(s) (INDICATE ONE ON EACH ENVELOPE)   If the envelope is not marked, as instructed above, the Purchaser will assume no responsibility for the misplacement or premature opening of bid(s).   DEADLINE FOR SUBMISSION OF BIDS:   The bids must be delivered at the Procurement Department, GIK Institute, Topi on or before as per schedule mentioned in Press Tender Notice and the same will be opened accordingly.   LATE BIDS:   Any bid received by the Purchaser after the prescribed deadline for submission of bids mentioned in Press Tender Notice will not be accepted and returned un-opened to the bidder(s).   BID OPENING:   The purchaser will open the Technical Bid, in the presence of bidder’s representative(s) who may chose to attend on date, time and location mentioned above.   The bidder(s) names, bid prices including bid price modification and bid withdrawals, if any, will be announced at the time of financial bid opening.   The Purchaser will examine the bids to determine whether they are complete, no computational errors have been made, the required sureties have been furnished, documents have been properly signed, and the bids are generally in order.   Arithmetical errors found will be corrected as follows:   Where there is a discrepancy between amount in figures and word, the amount in word will prevail.   Where there is a discrepancy between the unit price and the total amount derive from the multiplication of the unit price and the quantity, the unit price as quoted will govern, unless there is an obvious gross arithmetical error in unit price, in which event, the extended amount quoted would prevail.   In case the due date of bids opening falls on a holiday, the bids shall be opened on the next working day.   DETERMINATION OF RESPONSIVENESS:   After opening of the bids, the purchaser will determine whether each bid is substantially responsive to the requirements of the bidding documents.   For the purpose of this clause, a substantially responsive bid is one, which conforms to all the terms and conditions of the bidding documents without material deviation. A material deviation is one which means in-consistent with the bidding document, affects in any substantial way the scope, quality or prescribed delivery schedule or which limits in any substantial way, the Purchaser’s right or the bidder’s obligation under the contract.   A bid determined to be a non-responsive will be rejected by the purchaser and shall not subsequently be made responsive by the bidder(s) by correction of the non-conformity.   The purchaser may waive any minor deviation non-conformity or irregularity in a bid, which does not constitute a material deviation, provided that the waiver does not prejudice or affect the relative standing order of other bidder(s).   To assist in determining a bid’s responsiveness the bidder(s) may be asked for a clarification of his bid. The bidder(s) is not permitted, however, to change bid price or substance of his bid. The bidder(s) may lodge a written complaint for redressed of their grievances and disputes to Dispute Resolution Committee within fifteen days of the placement of the Technical Evaluation report on the web.   ISSUANCE OF PURCHASE ORDER (PO):   The Purchaser will issue Purchase Order to the successful bidder(s) whose bid is determined to be the best evaluated bid.   PAYMENT:   Payment will be made as follows after inspection and acceptance of goods, materials and equipment etc:   Payment after delivery   Payment Against Delivery Part Delivery Part Payment ____% advance payment against Bank Guarantee   DELIVERY SCHEDULE:   Delivery of required material against this tender is to be completed as soon as possible from the date of receipt of firm Purchase Order.   EXTENSION IN THE DELIVERY PERIOD:   Delivery of the goods shall be made by the supplier in accordance with the delivery schedule given in Purchase Order.   The supplier may claim extension of the time limits as set forth in the Purchase Order in case of:-   Changes in the specifications of goods, material & equipment by the Purchaser. Delay in provision of clarifications regarding material, drawings and services by the Purchaser.   Force Majeure pursuant to Clause # 15.   Justified reasons subject to a written request high-lighting the same within a period of seven working days prior to expiry of delivery period mentioned in Purchase Order.   It should be noted that a request for extension in delivery period shall be considered only if the supplier agrees in writing to pay any increase in taxes or any other charges levied by the Government during the extended delivery period. Purchaser shall not bear any additional price increase during the extended period.   In case of extension in delivery period, the supplier will extend validity of Performance Bond accordingly at his cost.   If the supplier fails to supply the ordered material for any reason, within stipulated time, the Performance Bond shall be forfeited and material shall be purchased from elsewhere at his risk and cost.   LIQUIDATED DAMAGES:   If you fail to supply the material in the above specified period, GIK Institute reserves the right to blacklist you for future business or forfeit the security money or impose penalty @ 0.35% per day of the contract value or may impose any other financial penalty as deemed fit.   Even after imposition of LDs, if the supplier fails to materialize the delivery (material and or services); the Purchaser reserves the right to cancel Purchase order/contract and to forfeit the earnest money (if applicable) after intimating the supplier for such cancellation / forfeiture.   FORCE MAJEURE:   The supplier shall not be liable for penalty for delay in delivery of ordered goods, if, and to the extent delay in delivery or other failure to perform his obligation under the Purchase Order, of being the result of occurrence of Force Majeure i.e. causes such as natural calamities, war, civil disturbance, military action, fire as well as other circumstance proved to the satisfaction of the Purchaser to be beyond the reasonable control of the supplier, which may impede the fulfillment of the obligations under the Purchase Order.   The supplier shall notify the Purchaser promptly of the occurrence of Force Majeure and submit his case in writing within 07 days of such occurrence.   If any of the party is prevented to fulfill its assumed obligations by Force Majeure of constant duration of at least one month, the party shall meet for negotiation. If no satisfactory agreement is reached within a period of two months from theCommencement of the Force Majeure conditions, either party shall have the right to cancel the Purchase Order with immediate effect.   INSPECTION AND TEST: The Purchaser’s representative(s) shall have the right to inspect and/or test the goods to confirm their conformity with respect to specifications mentioned in the Purchase Order. The representative of Procurement Cell will witness the inspection (where so required).   Should any inspected or tested goods fail to conform to the specifications the purchaser shall reject them and supplier shall replace the rejected goods. All costs incurred on such replacement shall be entirely born by the supplier.   Rejected material shall be moved/replaced by the supplier within 07 days from the receipt of letter/fax issued by the Procurement Department. The supplier shall be liable for the storage charges @ 0.2% (half percent) of the cost of rejected material on every day basis, if the same is not removed within seven days.   Acceptance/rejection of the material by 3rd party (where required) will be final and binding on both the parties.   WARRANTY:   The supplier shall warrant that all goods supplied under Purchase Order shall be according to specifications given in Purchase Order and approved drawings/design etc. Any deviation in material, drawing/design (where applicable) will be replaced by the supplier at his cost.   The Purchaser shall promptly notify the supplier in writing, of any claims arising under this warranty.   The supplier will invariably provide warranty/guarantee of spare and consumables.   QUALIFICATION OF SELECTED BIDDER(S)S:   The Purchaser will determine to its satisfaction whether the bidder(s) selected as having submitted the lowest evaluated, technically responsive bid qualifies to satisfactorily perform the order.   The determination will take into account the bidder(s) financial, technical & production capabilities, availability of items ordered for. The bidder(s) shall provide necessary documents as proof along with the bid.   Any affirmative determination will be a pre-requisite for award of the Purchase Order to the bidder(s). A negative determination will result in rejection of the bid.   The Purchaser reserves the right at the time of award of order to increase or decrease to a reasonable extent in the quantity of goods specified in the Tender Document without any change in price or other terms and conditions.   You are encouraged to inform Procurement Department on the following addresses/ contacts, in case where any GIK Institute employee ask for any type of favor whether monetary or in kind:-     DESIGNATION ADDRESS TEL # FAX # E. MAIL Director Procurement Ghulam Ishaq Khan Institute, Topi. 0938-281026 (Ex: 2340) 0939-281045 ahmed.raza@giki.edu.pk ANNEXURE - C     BIDDING FORM (TECHNICAL BID)   Director Procurement GIK Institute of Engineering Sciences and Technology, Topi     Gentlemen,   Having examined the Bidding Documents including the specifications, the receipt of which is hereby acknowledged, we the undersigned offer to supply & deliver «Description» in conformity with drawings, specifications of goods and conditions of Tender Document.   We undertake if our bid is accepted, to commence delivery within 30 days (Please specify days) from the date of receipt of your firm Purchase Order.   If our bid is accepted, we will provide the Performance Bond equal to 10% of the Purchase Order excluding GST, for due performance of the purchase order.   We agree to abide by all the terms & conditions of the tender for the period of 120 days from the opening of financial proposal & it shall remain binding upon us and may be accepted at any time before the expiry of that period or any extension thereof agreed by us.   Until a formal Purchase Order is placed, this bid, together with your written acceptance thereof, shall constitute a binding contract between us. We under-stand that you are not bound to accept the lowest priced or any bid you may receive.   Dated this ______________________ day of _______________ 20_____     (Signature) (In the capacity of)   Duly authorized to sign Bid for and on behalf of ______________________________________     (Signature of Witness)   Name: - __________________________________ Address: - ________________________________ ________________________________ ANNEXURE -D   BIDDING FORM (FINANCIAL BID) Director Procurement GIK Institute of Engineering Sciences and Technology, Topi     Gentlemen,   Having examined the Bidding Documents including the specifications, the receipt of which is hereby acknowledged, we the undersigned offer to supply & deliver «Description» in conformity with drawings, specifications of goods and conditions of Tender for the sum of Rs.______________________ (Total bid amount in words) (inclusive of all taxes) or such other sum as may be ascertained in accordance with the said conditions.   Until a formal Purchase Order is placed, this bid, together with your written acceptance thereof, shall constitute a binding contract between us. We understand that you are not bound to accept the lowest priced or any bid you may receive.   Dated this ____________________ day of ____________ 20_____             (Signature) (In the capacity of)   Duly authorized to sign Bid for and on behalf of ______________________________________           (Signature of Witness)   Name: - __________________________________ Address: - ________________________________ _________________ ...
Read more...

SUBMISSION OF PROPOSALS FOR MANUFACTURING OF MECHANICAL HARDWARE OF PROTOTYEPS AND INDUSTRIAL SCALE MACHINE TOOLS


NOTICE FORSUBMISSION OF PROPOSALS FROM PRE-QUALIFIED BIDDERS FOR MANUFACTURING OF MECHANICAL HARDWARE OF PROTOTYEPS AND INDUSTRIAL SCALE MACHINE TOOLS   GIKI/PD/FME-644/18   Sealed bids(single stage two envelopes) according to KPPRA Procurement Rules 2014 are invited from pre-qualified bidders for MANUFACTURING OF MECHANICAL HARDWARE OF PROTOTYEPS AND INDUSTRIAL SCALE MACHINE TOOLS– being funded by the Directorate of Science and Technology (DoST), Government of Khyber Pakhtunkhwa under PC1 ‘Promoting Enterprises of Reverse Engineering’. Detailed specifications and conditions are given in the tender document which can be downloaded from GIKI websites (www.giki.edu.pk). Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on August1st 2018. The technical proposal will be opened in the presence of bidders at 03:30 pm on the same day. Only pre-qualified bidders for this project may apply. Director Procurement, GIK Institute, Topi (KP) Ph: 0938-281026 Ext. 2340, Email: ahmed.raza@giki.edu.pk           ...
Read more...

JOIN GIK AS MECHANICAL / MACHATRONIC AND ELECTRONICS ENGINEER


Applications are invited for the posts of Mechanical / Mechatronicsand Electronics Engineers in the Faculty of Mechanical Engineering of the GIK Institute. Requisite qualifications and experience are as under:   “Bachelor’s Degree in Mechanical or Mechatronics Engineering or Electronics Engineering in the relevant discipline from a recognized university. Candidates having hands on experience of lab supervision and lab development will be given preference”.   Applicants must have strong hands-on experience inMechatronics Engineering, Micro Controllers and Mechanical Engineering.   GIK offers attractive salary packages and fringe benefits / facilities. Interested candidates should send their detailed CVs and a recent photograph to the HR Department by 20 July 2018.     Assistant Director (HR) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026, Fax No. 0938-281032 (GIK is an equal opportunity employer)   ...
Read more...

Join as Senior Software Developer


Join as   Senior Software Developer   Applications are invited from well qualified persons for the position of Senior Software Developer in the Institute. Requisite qualifications and experience are appended below: “B.S. in Computer Science/Software Engineering or relevant discipline (min. 18 years education) from a recognized university. M.S. qualification in the relevant field will be preferred. Four years’ relevant experience within higher education sector is preferred. This includes experience of developing software for academia and /or administration of Campus Management Systems or Enterprise Resource Planning software. Candidates must also have some experience in software project management or software project coordination. Technical skills – analyzing information, general programming, software design, software debugging, software documentation, software testing, problem solving, software development fundamentals, software development process, software requirements specifications and technical writing skills. General skills: excellent communication and presentation skills, flexibility, ability to resolve issues and to maintain positive relationships with users and team and ability to build own team. Profiles with successful projects will be given preference”. GIK offers attractive salary packages and fringe benefits / facilities. Interested candidates should send their detailed CVs and a recent photograph to the HR Department by 23 July, 2018. Application form placed on the website may be downloaded. Only shortlisted applicants will be called for interview. Assistant Director (HR) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026 Ext: 2442, Fax No. 0938-281032  E-mail: dirhr@giki.edu.pk (GIK is an equal opportunity employer) ...
Read more...

TENDER NOTICE FOR PURCHASE OF iMac PCs FOR FCSE


Tender no. GIKI/PD/FCSE-670/18   Sealed bids (single stage one envelope both financial & Technical proposals separately) are invited from reputed firms/ suppliers for the supply of iMac PCs for FCSE. Specifications and other terms and conditions are given in the tender document which can be downloaded from website (www.giki.edu.pk). Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on 29 June 2018. The proposal will be opened in the presence of bidders at 03:30 pm on the same day.       Assistant Director Procurement, GIK Institute, Topi (KP) Ph.0938-281026 Ext 2444, Email: taufeeq@giki.edu.pk ...
Read more...

TENDER NOTICE FOR Procurement of the equipment (Thermo-mechanical Analyzer, TMA)


Tender no. GIKI/PD/FMCE-654/18   Sealed bids (single stage two envelopes) according to PPRA Procurement Rules are invited from reputed firms/ suppliers for the Procurement of the equipment (Thermo-mechanical Analyzer, TMA) under HEC NRPU project-5558 – being funded under HEC (National Research Programme). Detailed specifications and conditions are given in the tender document which can be downloaded from PPRA and GIKI websites (www.giki.edu.pk) / (www.ppra.org.pk) Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on July 4th 2018. The proposal/s will be opened in the presence of bidders at 03:30 pm on the same day. Tender no. GIKI/PD/FMCE-654/18   Sealed bids (single stage two envelopes) according to PPRA Procurement Rules are invited from reputed firms/ suppliers for the Procurement of the equipment (Thermo-mechanical Analyzer, TMA) under HEC NRPU project-5558 – being funded under HEC (National Research Programme). Detailed specifications and conditions are given in the tender document which can be downloaded from PPRA and GIKI websites (www.giki.edu.pk) / (www.ppra.org.pk) Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on July 4th 2018. The proposal/s will be opened in the presence of bidders at 03:30 pm on the same day. Deputy Director Procurement, GIK Institute, Topi (KP)   Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk ...
Read more...

Join as Computer Engineer


Applications are invited from well qualified persons for the position of Computer Engineers in Faculty of Computer Science and Engineering. Requisite qualifications and experience are appended below:   “Computer Engineer:  Bachelor’s Degree in Computer Science or Computer Engineering from a recognized university. Other related majors may be considered as well. Candidates having hands on experience of lab supervision and lab development will be given preference”.     GIK offers attractive salary packages and fringe benefits / facilities. Interested candidates should send their detailed CVs and a recent photograph to the HR Department by 15th July, 2018. Application form placed on the website may be downloaded. Only shortlisted applicants will be called for interview.       Assistant Director (HR) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026 Ext: 2442, Fax No. 0938-281032 E-mail: dirhr@giki.edu.pk (GIK is an equal opportunity employer)   ...
Read more...

Faculty Positions Available


     Positions are available in the following disciplines:   ·           Computer Science and Engineering (Software Engineering, Databases, Systems Software and related areas) ·           Materials Science and Engineering ·           Chemical Engineering ·           Engineering Sciences (Physics, Mathematics and Electronic Engineering) ·          Mechanical Engineering (Design and Manufacturing Engineering, Thermo-Fluid Engineering and System Dynamics and Control/ Mechatronics) ·          Management Sciences & Humanities (specialization in Finance, Supply Chain, Marketing, HR, General Management), Pakistan & Islamic studies, Sociology, and English.   Requisite qualifications and experience are given below:     REQUISITE QUALIFICATIONS AND EXPERIENCE   PROFESSOR   PhD in the relevant discipline from a recognized university abroad or acceptable equivalent with six (6) years’ experience as Associate Professor and 12 research publications in refereed journals of international repute or 11 years post PhD teaching and research experience with 12 research publications in refereed journals of international repute. Two years industrial experience in organizations of international repute will be considered equivalent to one year of teaching and research experience in the university.   Candidates for Professorship must have demonstrated that their research achievements have had a recognized impact on the advance of knowledge in their subject area(s).   ASSOCIATE PROFESSOR   PhD in the relevant discipline from a recognized university abroad or acceptable equivalent with five (5) years’ service as Assistant Professor and six (6) research publications in refereed journals of international repute. Two years industrial experience in an organization of international repute will be considered equivalent to one year of teaching and research experience in the university. The applicant should have demonstrated the capability to conduct independent and original research.   ASSISTANT PROFESSOR PhD in the relevant discipline from a recognized university abroad or acceptable equivalent, preferably with some publications in refereed journals of international repute. The applicant should have demonstrated the capability to conduct independent and original research.   RESEARCH ASSOCIATE   Master’s degree in the relevant field(s) from a reputable university recognized by HEC, preferably having experience of teaching and research.     GIK offers attractive salary packages and fringe benefits / facilities. Interested candidates should send their detailed CVs and a recent photograph to the HR Department by 29th June, 2018. Only shortlisted applicants will be called for interview.   Assistant Director (HR) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa, Ph: 0938-281026 Ext: 2442 E-mail: dirhr@giki.edu.pk (GIK Institute is an equal opportunity employer) ...
Read more...

Research Support Staff Required - Faculty of Mechanical Engineering


Faculty of Mechanical Engineering                                                                                                                        USPCAS-E-ARG-VIII-001/01                                                                              June 06, 2018   Research Support Staff Required Applications along with updated resume are invited for the post of Research Support Staff under research project No. USPCAS-E-ARG-VIII-001/01 entitled, “Indigenous Design and Development of a Solar Powered Adsorption Refrigerator (SPAR)”, sponsored by U.S.-Pakistan Center for Advanced Studies in Energy-NUST. The candidates are required to possess DAE or Equivalent in Mechanical Engineering with professional experience in handling Refrigeration and Air-conditioning equipment. The candidate must also be willing to work at FME on weekends as well as after normal office hours (i.e. after 5:00 pm). The selected candidate will be paid an honorarium of Rs. 10,000/- p.m. The applications may be forwarded at tacheema@giki.edu.pk by June 25, 2018.     Dr. Taqi Ahmad Cheema Principal Investigator/Assistant Professor Faculty of Mechanical Engineering, GIK Institute of Engineering Sciences and Technology, Topi, District Swabi.     ...
Read more...

TENDER NOTICE FOR PURCHASE OF VARIOUS LAB EQUIPMENT UNDER USPCAS-E PROJECT


  Tender no. GIKI/PD/FME/USPCASE-660/18   Sealed bids (single stage two envelopes) according to PPRA Procurement Rules are invited from reputed firms/ suppliers for the supply of various lab equipment – being funded under HEC (USPCAS-E Program). Detailed specifications and conditions are given in the tender document which can be downloaded from PPRA and GIKI websites (www.giki.edu.pk)/ (www.ppra.org.pk) Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on June 11th 2018. The technical proposal will be opened in the presence of bidders at 03:30 pm on the same day. Assistant Director Procurement, GIK Institute, Topi (KP) Ph: 0938-281026 Ext. 2444, Email: taufeeq@giki.edu.pk       ...
Read more...

Tender Notice for The Supply of Manufacturing, Installation and commissioning of Various Items related to Turbine


Tender no. GIKI/PD/FME/PSF-659/18 Sealed bids (single stage two envelopes) according to PPRA Procurement Rules are invited from reputed firms/ suppliers for the supply of outsourced manufacturing, Installation and Commissioning of Turbine & Related items at project site in Mardan KPK. – being funded under PSF. Detailed specifications and conditions are given in the tender document which can be downloaded from PPRA and GIKI websites (www.giki.edu.pk) / (www.ppra.org.pk) Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 12:00 pm on June 11th  2018. The technical proposal will be opened in the presence of bidders at 03:30 pm on the same day. Deputy Director Procurement, Admin Block, GIK Institute, Topi, Swabi (KP)   Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk ...
Read more...

JOB OPPORTUNITIES


Applications are invited for the post of Director Finance in the GIK.  Requisite qualifications and experience are as under:   Director Finance: Chartered Accountant (FCA) or Cost and Management Accountant (FCMA) with 5 years’ post qualification experience OR First class Master’s Degree in Business Administration with specialization in Finance from a recognized University with CA inter or ICMA inter with 15 years’ post qualification experience in government, semi government, autonomous or a reputed private organization in the field of Accounts, Finance, Audit and Budgeting.   Interested candidates should send their detailed CVs/applications and a recent photograph to HR Department by 7th June, 2018. Only shortlisted applicants will be called for interview.         Assistant Director (HR) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026, Fax No. 0938-281032 E-mail: dirhr@giki.edu.pk (GIK Institute is an equal opportunity employer)   ...
Read more...

NOTICE INVITING TENDER


Society for Promotion of Engineering Sciences and Technology in Pakistan invites sealed bids (Technical and Price Bids) on “Single Stage Two Envelope Bidding Procedure” for the Supply, Installation, Testing, Commissioning, Operation and Maintenance of Heating, Ventilation and Air Conditioning (HVAC) Works at the New Academic Block of GIK Institute, Topi, from eligible firms or persons licensed by Pakistan Engineering Council in Category C-04 (ME-01) and higher, relevant to the value of Works. A foreign bidder is entitled to bid only in a joint venture with a Pakistani Constructor in accordance with the provisions of PEC bye-laws. The Bid documents can be obtained from office of the undersigned during working office hours on submission of a written application and upon payment of a non refundable cost of Bid document in cash. Each Bid must be accompanied by a BID SECURITY equivalent to 2% of quoted price in Pak Rs or, an equivalent amount in a freely convertible currency. Bid Security in the form of Deposit at Call or Bank Guarantee by a Schedule Bank in Pakistan, in favor of the Employer, are acceptable only. Any Bid not accompanied by an acceptable Bid Security, shall be rejected by the Employer being Non Responsive. Bids should be delivered at or before 1100 hours on the 11 June, 2018 on the address given below. Technical Bids will be opened at 1130 hours by the Bid Opening Committee on the same day in presence of the Bidders or their authorized representatives who choose to attend at SOPREST Office, Islamabad. Price Bids of the Bidders whose Technical Bids are determined substantially responsive will be opened at a later stage in presence of the Bidders or their authorized representatives who choose to attend, at the time which will be notified in advance.. Conditional, incomplete, overwriting & bid filled with lead pencils are not acceptable. Pre-Bid meeting will be held on 07 June, 2018 at 1100 hours in office of undersigned. The Competent Authority reserves the right to accept or reject any one or all proposals without assigning any reason(s) thereof.   Director Works (SOPREST), 534, Street No. 33, NPF, E-11/3, Islamabad Ph. No.: 051-2228787-89   ...
Read more...

Join as Electrical Engineer (Power)


Applications are invited from well qualified persons for the position of Lab. Engineers with Electrical Engineering (Power) in Faculty of Electrical Engineering, GIK Institute. Requisite qualifications and experience are appended below:   “Electrical Engineer (Power):  Bachelor’s Degree in the relevant discipline from a recognized university. Candidates having hands on experience of lab supervision and lab development will be given preference”.     GIK offers attractive salary packages and fringe benefits / facilities. Interested candidates should send their detailed CVs and a recent photograph to the HR Department by 31st May, 2018. Application form placed on the website may be downloaded. Only shortlisted applicants will be called for interview.       Assistant Director (HR) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026 Ext: 2442, Fax No. 0938-281032 E-mail: dirhr@giki.edu.pk (GIK is an equal opportunity employer)   ...
Read more...

Tender # GIKI/PD/EQUIPMENT-655/18 for PURCHASE OF OFFICE EQUIPMENT FOR NEW ACADEMIC BLOCK


Tender no. GIKI/PD/EQUIPMENT-655/18 Sealed bids (single stage two envelopes) according to KPPRA Procurement Rules 2014 are invited from reputed firms/ suppliers for the procurement of Office Equipment for new block academic block – being funded by the Govt. of KP. Detailed specifications and conditions are given in the tender document which can be downloaded from KPPRA and GIKI websites (www.giki.edu.pk) / (www.kppra.gov.pk) Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on June 4th, 2018. The technical proposal will be opened in the presence of bidders at 03:30 pm on the same day. Deputy Director Procurement, GIK Institute, Topi (KP) Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk   ...
Read more...

Join as Project Research Associate


   Applications are invited for the post of Research Associate under Research Project No. PSF/Res/ P-GIKI/Engg (170) sponsored by Pakistan Science Foundation, Islamabad. The candidates are required to possess M. Sc /B.Sc (Hons) degree in the field of Materials & Metallurgy with at least two first divisions (one in M.Sc /B.Sc (Hons) and no third division in the academic career. Experience of post M. Sc /B.Sc (Hons) research in the relevant field will be given preference. The selected candidate will be paid @ Rs.15,000/- p.m fixed but if she / he is enrolled in M. Phil and Ph.D program, she / he will be paid @Rs.20,000/- and Rs.25,000/- p.m. fixed respectively. However, she/he will be required to sign a bond for entire duration of project. Last date for receipt of applications is 21st May, 2018.     Assistant Director (HR) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026 Ext: 2442, Fax No. 0938-281032 E-mail: dirhr@giki.edu.pk (GIK is an equal opportunity employer) ...
Read more...

Application for the Post of Driver


        JOB OPPORTUNITIES   Applications are invited for the post of Driver in the GIK Institute. Requisite qualifications and experience are as under:   Driver: Matric passed with HTV with PSV valid license with 10 years practical driving experience on HTV from reputed Institutions. Age limit   Interested candidates of the age of 35 years should send their applications on prescribed application form (available along with attested copies of educational documents and experience certificates, Driving License, CNIC and a recent photograph to HR Department by 18th May, 2018. Application Form placed on the website may be downloaded. Only short listed applicants will be called for interview.   Assistant Director (HR/Facilitation) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026, Fax No. 0938-281032 E-mail: dirhr@giki.edu.pk (GIK Institute is an equal opportunity employer) p { margin-bottom: 0.1in; direction: ltr; line-height: 120%; text-align: left; } ...
Read more...

TENDER NOTICE FOR PURCHASE OF OFFICE EQUIPMENT FOR ENTERPRISES OF REVERSE ENGINEERING


TENDER NOTICE FOR PURCHASE OF OFFICE EQUIPMENT FOR ENTERPRISES OF REVERSE ENGINEERING Tender no. GIKI/PD/RE-656/18 Sealed bids(single stage two envelopes) according to KPPRA Procurement Rules 2014 are invited from reputed firms/ suppliers for the procurement of Office Equipment – being funded by the Directorate of Science and Technology (DoST), Govt. of KP. Detailed specifications and conditions are given in the tender document which can be downloaded from KPPRA and GIKI websites (www.giki.edu.pk) / (www.kppra.gov.pk) Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on May 22nd, 2018. The technical proposal will be opened in the presence of bidders at 03:30 pm on the same day. Deputy Director Procurement, GIK Institute, Topi (KP) Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk     p { margin-bottom: 0.1in; direction: ltr; line-height: 120%; text-align: left; }p.western { font-family: "Times New Roman", serif; font-size: 12pt; }p.cjk { font-size: 12pt; }p.ctl { font-family: "Times New Roman"; font-size: 12pt; }a:link { color: rgb(0, 0, 255); } ...
Read more...

PURCHASE / SUPPLY OF RESEARCH IT/LAB EQUIPMENT


TENDER NOTICE FOR 1. Tender no. GIKI/PD/FCSE-657/18 2. Tender no. GIKI/PD/FEE-658/18 Sealed bids (single stage two envelopes) according to PPRA Procurement Rules are invited from reputed firms/ suppliers for the supply of 1. IT Equipment 2. Research IT/Lab equipment – being funded under HEC (National Research Program). Detailed specifications and conditions are given in the tender document which can be downloaded from PPRA and GIKI websites (www.giki.edu.pk)/ (www.ppra.org.pk) Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on May 14th 2018. The technical proposal will be opened in the presence of bidders at 03:30 pm on the same day. Assistant Director Procurement, GIK Institute, Topi (KP) Ph: 0938-281026 Ext. 2444, Email: taufeeq@giki.edu.pk   ...
Read more...

TENDER NOTICE FOR Procurement of the equipment (Thermo-mechanical Analyzer, TMA)


  Tender no. GIKI/PD/FMCE-654/18 Sealed bids (single stage two envelopes) according to PPRA Procurement Rules are invited from reputed firms/ suppliers for the Procurement of the equipment (Thermo-mechanical Analyzer, TMA) under HEC NRPU project-5558 – being funded under HEC (National Research Programme). Detailed specifications and conditions are given in the tender document which can be downloaded from PPRA and GIKI websites (www.giki.edu.pk) / (www.ppra.org.pk) Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on May 15th 2018. The technical proposal will be opened in the presence of bidders at 03:30 pm on the same day. Deputy Director Procurement, GIK Institute, Topi (KP) Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk   ...
Read more...

PURCHASE OF LAB BASED ELECTRO HYDRODYNAMIC INKJET PRINTING SYSTEM FOR RESEARCH ON PRINTED ELECTRONICS


Tender no. GIKI/PD/FME-645/18   Sealed bids (single stage two envelopes) according to PPRA Procurement Rules are invited from reputed firms/ suppliers for the procurement Lab Based Electro hydrodynamic Inkjet Printing system for research on printed electronics – being funded under HEC (National Research Programme). Detailed specifications and conditions are given in the tender document which can be downloaded from PPRA and GIKI websites (www.giki.edu.pk) / (www.ppra.org.pk) Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on May 11th 2018. The technical proposal will be opened in the presence of bidders at 03:30 pm on the same day.   Deputy Director Procurement, GIK Institute, Topi (KP)                                                                                                       Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk ...
Read more...

Join as Assistant Director (Works)


  Join as Assistant Director (Works)   Applications are invited from well qualified persons for the position of Assistant Director (Works) in the GIK Institute. Requisite qualifications and experience are appended below:   ELIGIBILITY CRITERIA: Minimum qualification required is B.Sc. Engineering (Civil/Elec) from HEC recognized institution with valid PEC registration. Additional courses & certifications relevant to the post will be an added advantage. EXPERIENCE: Eight (08) years hands on experience of work with thorough knowledge of HVAC, plumbing and electrical systems; knowledge of facility and construction, safety standards & basic knowledge of public purchasing and contracts. AGE: Max 35 Years   Duties Will report to Director (Project & Works) & in his absence to Deputy Director (Works) on all matters related to Projects & Works of GIK Institute. He will assist DD (Works) in: Efficient execution of all new works, maintenance, repair and misc activities in order of all building works, Electrical/ Mechanical installations, tools, plants, etc. Efficient running of installations, HVAC Plants, Workshops, Sewerage Treatment Plant & Water Supply arrangements.  The execution of all original works and the maintenance of all buildings, furniture, machinery & operation and maintenance of Electrical Distribution System & CATV. Proper and economic expenditure of the funds complying with the prescribed procedure in connection with the maintenance of buildings & assets of GIK Institute Prepare specification, bills of quantities and other contracts documents and maintenance of construction accounts. Prepare all measurements for works, services and rates of payment, make checks of measurements and examine a percentage of contractor’s bills technically before payment.   Supervise the actual execution of all works in accordance with sanctioned estimates, specifications and Drawings & record measurements of the works.  Carry out periodical check of the buildings & installations and keep them in a proper state of repairs by timely action and wise utilization of funds, with the sanction of competent authority. Prepare petty requisitions and plans and estimates for special repairs and additions and alterations of works/ schemes To supervise the actual execution of Water Supply Schemes, Sewerage Schemes, Projects works and other affairs & repairs done through the contractors or by daily labour and to see that they are executed in accordance with the plans and specifications approved by the competent authority for the said work with sound materials.  Maintain the Register of progress and instructions on all works and make arrangement for adequate strength of labour at economical rates within the sanctioned rates when a work is required to be done departmentally. To supervise labour employed on daily wages and to submit labour reports and to check their attendance on his visits to works/ schemes Reporting to the Director (Projects & Works), and the concerned authorities immediately, occurrence of any serious accident, etc. and thereafter ensure measures that no damage takes place to the GIK Institute property.     GIK offers attractive salary packages and fringe benefits / facilities. Interested candidates should send their detailed CVs and a recent photograph to the HR Department by 4th May, 2018. Application form placed on the website may be downloaded. Only shortlisted applicants will be called for interview.     Assistant Director (HR) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026 Ext: 2442, Fax No. 0938-281032                                                     E-mail: dirhr@giki.edu.pk (GIK is an equal opportunity employer)       ...
Read more...

ON-CAMPUS JOBS FOR UNDERGRADUATE STUDENTS


The GIK Institute intends to take up an effective way for promoting GIK (including attracting more students for undergraduate admission for 2018 and onward through the extensive and planned use of social media (facebook, twitter etc) Therefore, applications are invited from the eligible, suitable and deserving students of GIK Institute for the following two positions in IT Department, GIK Institute for on-campus assignments, on part time basis: Content Managers (Web, Facebook, Twitter – 2 Positions             Skills Required:   Strong sense of Graphic Design and Production as articles with images receive more views (90% and above) than those without an image. Aptitude for writing as a social media manager should have a good command of the language and the ability to express their views in writing. Clear understanding of Institute’s requirement. S/he should have a big picture understanding of how social media content fit into search rankings, and how all content operates within the defined framework. Some social media working experiencewhere s/he has performed similar nature of job. Knowledge (or ability to acquire knowledge) of the Institute’s profile and activities, including the admissions process.            Terms of Reference:   Sophomore or third year undergraduate students with CGPA of 2.7/4.00 and above; Recipients of any scholarship or financial assistance of any kind are not eligible to apply; The selected student(s) will be required to work for a maximum of 10 hours per week (or 20 hours during summer) if the following criteria are met; The student maintains good academics status; The student should remain available during the summer if required; Satisfactory performance report submitted by the Dean/Head of Department concerned; The remuneration amount (about PKR 200/- per hour) will be paid to students in cash/adjustment in Mess bills on monthly basis.   All interested students are advised to submit their applications through their Deans/HoDs concerned to HR Department (Room No. G-15), latest by 30th April 2018.     Assistant Director (HR/Facilitation) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa   ...
Read more...

Join as Electrical Engineer (Power)


Applications are invited from well qualified persons for the position of Lab. Engineers with Electrical Engineering (Power) in Faculty of Electrical Engineering, GIK Institute. Requisite qualifications and experience are appended below:   “Electrical Engineer (Power):  Bachelor’s Degree in the relevant discipline from a recognized university. Candidates having hands on experience of lab supervision and lab development will be given preference”.     GIK offers attractive salary packages and fringe benefits / facilities. Interested candidates should send their detailed CVs and a recent photograph to the HR Department by 20th April, 2018. Application form placed on the website may be downloaded. Only shortlisted applicants will be called for interview.       Assistant Director (HR) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026 Ext: 2442, Fax No. 0938-281032                                                                                                                E-mail: dirhr@giki.edu.pk (GIK is an equal opportunity employer)   ...
Read more...

Expression of Interest (EOI) For manufacturing of mechanical hardware


Attached below is the expression of interest for manufacturing of mechanical hardware of prototypes and industrial scale machine tools.
Read more...

On Campus Jobs for Undergraduate (Finance)


ON CAMPUS JOBS FOR UNDERGRADUATE STUDENTS The institute intends to offer on campus job to one student of Management Sciences Department to be placed in the Finance Department. Applications are invited from the eligible and deserving students of the Institute for recovery of financial assistance loan through On-campus assignments on part time basis:   Finance Coordinator Skills Required Well versed in communication and interpersonal skills, especially convincing power Confident Knowledge of basic financial terminologies Tactful Motivated Pro-active/ self- initiator Energetic Patience/ability to work under pressure Terms of Reference:   Sophomore or third year undergraduate students of MGS with CGPA of 2.7/4.00 and above; The selected student(s) will be required to work for a maximum of 10 hours per week (or 20 hours during summer) as long as the following criteria are met; The student maintains good academics status; Student should remain available during the summer, if required; Satisfactory performance report submitted by the Dean/Head of Department concerned; The remuneration amount (Rs. 200/- per hour) will be paid to students in cash/ adjustment in Mess bills on monthly basis. Students hired on “On Campus Jobs” as Finance Coordinator in Finance Department will report to Director Finance. Students will be allotted a shared office adjacent to the office of Director Finance. At the beginning of each week, student must agree the schedule of work for that week with Director Finance. Miss Ayesha (Assistant Director Finance) will monitor the progress of students on the assigned tasks and will maintain a record of the progress made by the students. She will also maintain a register of attendance to record the number of hours worked by students each day. At the end of each month, Miss Ayesha will send the attendance record to accounts for making payments to the students.   All interested students are advised to submit their applications through their Deans/HoD concerned to AD HR (Room No. 10), latest by April 12, 2018.   ...
Read more...

PURCHASE OF MISCELLANEOUS ITEMS PERTAINING TO PROTOTYPES OF STRATEGIC & NON-STRATEGIC MACHINES


Tender no. GIKI/PD/FME-653/18   Sealed bids (single stage two envelopes) according to KPPRA Procurement Rules 2014 are invited from reputed suppliers for the purchase of miscellaneous items pertaining to prototypes of strategic and non-strategic machines – being funded by the Directorate of Science and Technology (DoST), Government of Khyber Pakhtunkhwa under PC1 ‘Promoting Enterprises of Reverse Engineering’. Detailed specifications and conditions are given in the tender document which can be downloaded from KPPRA and GIKI websites (www.giki.edu.pk) / (www.kppra.gov.pk). Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on April 18th 2018. The technical proposal will be opened in the presence of bidders at 03:30 pm on the same day. Quality of the supplies is of prime importance. Only established supplier who can provide warranty of items may apply.  Director Procurement, GIK Institute, Topi (KP)   Ph: 0938-281026 Ext. 2340, Email: ahmed.raza@giki.edu.pk ...
Read more...

Job opportunity (Office Assistant)


Attached below is the notice
Read more...

TENDER NOTICE FOR PURCHASE OF OFFICE EQUIPMENT


Tender no. GIKI/PD/INCUBATION-636/17   Sealed bids(single stage two envelopes) according to KPPRA Procurement Rules 2014 are invited from reputed firms/ suppliers for the procurement of Office Equipment – being funded by the Directorate of Science and Technology (DoST), Govt. of KP. Detailed specifications and conditions are given in the tender document which can be downloaded from KPPRA and GIKI websites (www.giki.edu.pk) / (www.kppra.gov.pk) Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on April 16th, 2018. The technical proposal will be opened in the presence of bidders at 03:30 pm on the same day. Deputy Director Procurement, GIK Institute, Topi (KP)   Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk ...
Read more...

Tender for the purchase of Lenovo server


Attached below is the tender notice for the purchase of lenovo server.
Read more...

Job Opportunities


Kindly open the attachment for the relevant job opportunities
Read more...

Expression of Interest (EOI) For Prequalification of Furniture Supplier


Attached below is the EOI for prequalification of Furniture supplier
Read more...

Purchase/supply of equipment for power system lab


Attached below is the tender notice for the purchase of power system lab.
Read more...

Purchase/supply of lab scale VMD equipment and research lab equipment


Attached below is the tender notice for the following:  PURCHASE OF LAB SCALE VMD EQUIPMENT PURCHASE / SUPPLY OF  RESEARCH LAB EQUIPMENT ...
Read more...

Purchase of thermodynamic lab equipment


Attached below is the tender for the purchase of lab equipment.
Read more...

Join as Senior Software Developer


Applications are invited from well qualified persons for the position of Senior Software Developer in the Institute. Requisite qualifications and experience are appended below: “B.S. in Computer Science/Software Engineering or relevant discipline (min. 16 years education) from a recognized university. M.S. qualification in the relevant field will be preferred. Four years’ relevant experience within higher education sector is preferred. This includes experience of developing software for academia and /or administration of Campus Management Systems or Enterprise Resource Planning software. Candidates must also have some experience in software project management or software project coordination. Technical skills – analyzing information, general programming, software design, software debugging, software documentation, software testing, problem solving, software development fundamentals, software development process, software requirements specifications and technical writing skills. General skills: excellent communication and presentation skills, flexibility, ability to resolve issues and to maintain positive relationships with users and team and ability to build own team. Profiles with successful projects will be given preference”. GIK offers attractive salary packages and fringe benefits / facilities. Interested candidates should send their detailed CVs and a recent photograph to the HR Department by 20th March 2018. Application form placed on the website may be downloaded. Only shortlisted applicants will be called for interview. Assistant Director (HR) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026 Ext: 2442, Fax No. 0938-281032  E-mail: dirhr@giki.edu.pk (GIK is an equal opportunity employer)   ...
Read more...

Purchase/supply of power distribution and utilization trainers


Attached below is the tender document for the purchase/supply of power distribution and utilization trainers.
Read more...

Post of Assistant Director (Library)


Applications are invited from well qualified persons for the position of Assistant Director (Library) in the Institute. Requisite qualifications and experience are appended below: “Master’s Degree in Library and Information Science (M.L.I.Sc.) or Master’s Degree in Library Science from a recognized university with 2 years’ experience of library management and modern information technologies such as on-line data base, searching, CD-ROMs and development of computerized database etc. in a teaching or research institution of repute. Should have good working knowledge of computer and excellent communication skills.” GIK offers attractive salary packages and fringe benefits / facilities. Interested candidates should send their detailed CVs and a recent photograph to the HR Department by 15th March 2018. Application form placed on the website may be downloaded. Only shortlisted applicants will be called for interview.   Assistant Director (HR) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026 Ext: 2442, Fax No. 0938-281032   E-mail: dirhr@giki.edu.pk               (GIK is an equal opportunity employer)   ...
Read more...

PURCHASE OF MISCELLANEOUS ITEMS PERTAINING TO PROTOTYPES OF STRATEGIC & NON-STRATEGIC MACHINES



Read more...

TENDER NOTICE FOR PURCHASE / SUPPLY OF WATER PROOFING MATERIAL & OTHER ITEMS


Tender no. GIKI/PD/WORKS-648/18 Sealed bids (Technical & commercial proposal) are invited from reputed firms/ suppliers for the  PURCHASE / SUPPLY OF WATER PROOFING MATERIAL & OTHER ITEMS  - Specifications and other terms and conditions are given in the tender document which can be downloaded from website (www.giki.edu.pk). Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on 7th March, 2018.  Deputy Director Procurement, Admin Block, GIK Institute, Topi, Swabi (KP) Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk ...
Read more...

Post of Security Guard


Applications are invited for the post of Security Guard in the GIK.  Requisite qualifications and experience are as follows: Security Guard: Middle/Matriculation passed with 10 years experience as Security Guard/Chowkidar in a reputed private organization. Preference will be given to retired personnel from SSG or other groups of Armed Forces. Interested candidates should send their applications along with attested copies of educational documents and experience certificates, Army Discharge Certificate, CNIC and one recent photograph to HR Department by 5thMarch, 2018. Only shortlisted applicants will be called for test/interview.    Assistant Director (HR/Facilitation) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026, Fax No. 0938-281032 E-mail: dirhr@giki.edu.pk (GIK Institute is an equal opportunity employer ...
Read more...

Hiring of Clearing Agent Firms


Applications are invited for the hiring of clearing agent firms having offices in Islamabad, Lahore, Peshawar & Karachi. Requisite qualifications and experience are as under Clearing agent should be registered as clearing agent with customs and tax authorities and well versed with all custom clearance procedures & exemptions protocols for an educational institute. Custom clearing services shall include but not limited to: 1.    Provide a wide range of clearance services and should have the capacity to handle commercial accounts 2.    Freight forwarding and clearing services and related services from point of entry in Pakistan to the point to GIKI Stores in Topi, Swabi - CCIE clearance, and authorization to clear shipment after securing original shipping documents, tax exemption certificate, undertaking, and all such documents that may be necessary to support such clearance. 3.    Expedite the processing of Tax Exemption approvals 4.    Advice on the latest Import legislation promulgations. 5.    Providing their services in line with pre-agreed rates and deliver invoices based upon proper authority from GIKI 6.    Coordinate with vessel agent, track vessel position and update GIKI on estimated arrival time of the vessel at port. Maintain effective coordination with all stakeholders, such Shipping Agent/Vessel Agent, Port & Customs Authority, and Consignee / GIKI. 7.    Other duties & assignment as assigned by GIKI. Interested firms should send their applications with complete profile and relevant experience details (along with attested copies of credential / license etc) to Procurement Department by March 12th, 2018. Only short listed applicants will be called for interview.   Deputy Director (Procurement) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026 Ext:2213 Fax No. 0938-281032 E-mail: shahzebali@giki.edu.pk ...
Read more...

(1.) TENDER NOTICE FOR PURCHASE OF ELECTRO-HYDRODYNAMIC INKJET PRINTING SYSTEM (2.) PROCUREMENT OF RESEARCH BASED LAB EQUIPMENT FOR SOLAR &


Tender no. GIKI/PD/FME-645/18 & Tender no. GIKI/PD/FME-646/18   Sealed bids (single stage two envelopes) according to PPRA Procurement Rules are invited from reputed firms/ suppliers for the procurement of 1.  PROCUREMENT OF LAB BASED ELECTROHYDRODYNAMIC INKJET PRINTING SYSTEM FOR RESEARCH ON PRINTED ELECTROINCS 2.  PROCUREMENT OF RESEARCH BASED LAB EQUIPMENT FOR SOLAR & FUEL CELLS AND SENSING DEVICES - as per detailed specifications and conditions given in the tender document which can be downloaded from PPRA and GIKI websites (www.giki.edu.pk) / (www.ppra.org.pk) Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on March 14th, 2018. The technical proposal will be opened in the presence of bidders at 03:30 pm on the same day. Deputy Director Procurement, GIK Institute, Topi Distt Swabi (KPK) Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk   ...
Read more...

TENDER NOTICE FOR PURCHASE OF X-Ray Machine


Tender no. GIKI/PD/MC-639/17 Sealed bids (Technical & commercial proposal) are invited from reputed firms/ suppliers for the supply of   X-Ray Machine 300MA with CR with Camera   or alternate - Specifications and other terms and conditions are given in the tender document which can be downloaded from website (www.giki.edu.pk). Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on 9th March, 2018.    Deputy Director Procurement, Admin Block, GIK Institute, Topi, Swabi (KP) Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk   ...
Read more...

Tender for manufacturing of mechanical hardware of prototypes


Attached below is the tender document for the manufacturing of mechanical hardware of prototypes of strategic and non strategic machines.    ...
Read more...

Post of Machinist


Applications are invited for the post of Machinist (Mechanical) in the GIK.  Requisite qualifications and experience are as under: Machinist (Mechanical):  DAE from a Board of Technical Education in General Engineering (Machinist) with two years' post diploma experience. Interested candidates should send their C.Vs/applications along with attested copies of educational documents and experience certificates, CNIC and two recent photographs to HR Department by 15th February, 2018. Application Form attached herewith. Only short listed applicants will be called for interview.       Assistant Director (HR/Facilitation) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026, Fax No. 0938-281032 E-mail: dirhr@giki.edu.pk   ...
Read more...

TENDER NOTICE FOR PURCHASE / SUPPLY OF CNC WOOD ROUTER MACHINE


Tender no. GIKI/PD/FMC-640/18 Sealed bids (Technical & commercial proposal) are invited from reputed firms/ suppliers for the  PURCHASE / SUPPLY OF CNC WOOD ROUTER MACHINE  - Specifications and other terms and conditions are given in the tender document which can be downloaded from website (www.giki.edu.pk). Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on 16th February, 2018.    Deputy Director Procurement, Admin Block, GIK Institute, Topi, Swabi (KP) Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk   ...
Read more...

Vacancies


Attached below is the notice for job vacancies at GIK Institute.
Read more...

Vacancy - Research Associate (Materials Engineering)


Applications are invited from well qualified persons for the position of Research Associate in the Faculty of Materials and Chemical Engineering of the Institute. Candidates must have a Master’s degree (18 years) in Materials Engineering from a reputable university recognized by HEC, preferably having experience of teaching and research. GIK offers attractive salary package and other benefits. Interested candidates should send their detailed C.Vs / and a recent photograph to the HR Department by 29th January, 2018. Only shortlisted applicants will be called for interview.   Assistant Director (HR) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa  Fax No. 0938-281032, Ph: 0938-281026 Ext: 2442 Email: dirhr@giki.edu.pk     (GIK is an equal opportunity employer) ...
Read more...

(1) Tender no. GIKI/PD/FMCE-637/17 AND (2) Tender no. GIKI/PD/FMCE-638/17


Sealed bids (Technical & commercial proposal) are invited from reputed firms/ suppliers for the supply of 1.  Supply of Metallurgy Laboratory Equipment 2.  Supply of equipment and accessories for Energy Storage Devices Lab - as per specifications and other terms and conditions given in the tender document which can be downloaded from website (www.giki.edu.pk). Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on 23rd January 2018.  Deputy Director Procurement  GIK Institute, Admin Block, Topi, Swabi (KP) Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk ...
Read more...

Vacancy for a Research Associate in the Faculty of Computer Science and Engineering


Applications for an anticipated position of a Research Associate (RA) are solicited. An MS in Computer Science or Computer Engineering is required. Fresh graduates may also apply. In addition to research and some committees work, a RA is expected to teach up to three courses in Computer Science, e.g., Database, Software Engineering, Programming Languages, etc. Please send by January 15, 2018, your resume, three reference letters and recent transcripts including a cover letter to: Human Resource Department GIK Institute of Engineering Sciences and Technology Topi, Swabi, KP Email: sherali@giki.edu.pk Website: www.giki.edu.pk Tele: 0938-281026-9 Ext: 2740 ...
Read more...

TENDER NOTICE - Laboratory Equipment for Civil Engineering Department


Sealed bids (Technical & commercial proposal) are invited from reputed firms/ suppliers for the supply of Laboratory Equipments for Civil Engineering Dept - Specifications and other terms and conditions are given in the tender document which can be downloaded from website (www.giki.edu.pk). Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on 29th December 2017.  Deputy Director Procurement  GIK Institute, Room# F9, Admin Block, Topi, Swabi (KP) Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk ...
Read more...

TENDER NOTICE - SFP Optical Module, SFP Interface Card & High End – Next Generation Firewall


Sealed bids (Technical & commercial proposal) are invited from reputed firms/ suppliers for the supply of  SFP Optical Module, SFP Interface Card & High End – Next Generation Firewall - Specifications and other terms and conditions are given in the tender document which can be downloaded from website (www.giki.edu.pk). Tender Fee (non-refundable) is Rs. 1,000. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on 3rd January, 2018.  Deputy Director Procurement, F-9, Admin Block, GIK Institute, Topi, Swabi (KP) Ph: 0938-281026 Ext. 2213, Email: shahzebali@giki.edu.pk ...
Read more...

Post of Driver


Applications are invited for the post of Driver in the GIK Institute.  Requisite qualifications and experience are as under: Matric passed with HTV with PSV valid license with 10 years practical driving experience on HTV from reputed Institutions. Age limit Interested candidates of the age of 35 years should send their applications on prescribed application form (available  along with attested copies of educational documents and experience certificates, Driving License, CNIC and a recent photograph to HR Department by 1st January, 2018. Application Form placed on the website may be downloaded.  Assistant Director (HR/Facilitation) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026, Fax No. 0938-281032 E-mail: dirhr@giki.edu.pk ...
Read more...

Tender notices for purchase of Civil and SFP laboratory equipment


Attached below are the notices and schedules for the purchase of the following: Purchase of SFP Optical Module, SFP Interface card and high end, - Next Generation Firewall. Purchase of laboratory equipment for Civil Engineering Department.   ...
Read more...

Vacancy for Driver


Applications are invited for the post of Driver in the GIK Institute.  Requisite qualifications and experience are as under:   Driver: Matric passed with HTV with PSV valid license with 10 years practical driving experience on HTV from reputed Institutions. Age limit   Interested candidates of the age of 35 years should send their applications on prescribed application form (available  along with attested copies of educational documents and experience certificates, Driving License, CNIC and a recent photograph to HR Department by 1st January, 2018. Application Form placed on the website may be downloaded. Only short listed applicants will be called for interview. ...
Read more...

Job Opportunities


Applications are invited from well qualified persons for the positions of Professor, Associate Professor,  Assistant Professor, Mechanical Engineer, Assistant Director (Library) and Private Secretary in the Institute. Interested candidates should send their detailed C.Vs and a recent photograph to the HR Department by 15th December, 2017. Please, download complete advertisement along with application form. ...
Read more...

Vacancy for Computer Engineer in FCSE, GIK Institute


The Faculty of Computer Science and Engineering (FCSE), Ghulam Ishaq Khan Insitute of Engineering Sciences and Technology is seeking to fill a vacant position of a Computer Engineer. The requirement for this position is: A Bachelors (BS) degree in Computer Science from a recognized HEC affiliated or equivalent institution with high academic standing. Other related majors may be considered as well. Please send your resume alongwith transcripts of BS degree before November 10, 2017 to: Mr. Hamid ur Rehman PS to Dean Faculty of Computer Science and Engineering GIK Institute of Sciences and Technology Topi, Swabi Email: hamid@giki.edu.pk ...
Read more...

Tender notice for the purchase of office/classroom furniture/fixtures


Please, download the tender notice and tender document, attached here.
Read more...

Vacancy for the Manager (Research Operations and Development)


GIK Institute seeks a full time Manager (Research Operations and Development)  to oversee all aspects of the operation of the ORIC, which will also include the research administration (budgeting, auditing and accounting, human resources, management and maintenance of facilities and equipment, implementation of research contracts and human resources). Interested candidates are requested to send their detailed CV and a recent photograph to the following by 5.11.2017. Please, also see the advertisement for details, attached herewith.    Assistant Director (HR/Facilitation) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa, Ph: 0938-281026 Ext: 2442 E-mail: dirhr@giki.edu.pk ...
Read more...

Applications invited for the post of Accounts Officer at GIK Institute


@page { margin: 0.79in } p { margin-bottom: 0.1in; direction: ltr; line-height: 120%; text-align: left; orphans: 2; widows: 2 } p.western { font-family: "Times New Roman", serif; font-size: 10pt } p.cjk { font-family: "Times New Roman"; font-size: 10pt } p.ctl { font-family: "Times New Roman"; font-size: 10pt } Interested applicants are invited to apply for the post of Accounts Officer in GIK Institute. ...
Read more...

Tender document for the purchase of lecture recording system


Attached below is the tender document for the purchase of lecture recording system. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on 25th October 2017.  ...
Read more...

Tender for the purchase of microcontroller training kit


Attached below is the tender document for the purchase of microcontroller training kit and other equipment. Sealed bids along with 2% earnest money of the total bid cost should reach before 03:00 pm on 2nd November, 2017. ...
Read more...

Vacancy for Director of Rector's Office


The GIK Institute seeks to select an Office Director in the Rector’s office, Topi, to organize minute and process the proceedings, conferences and meetings held at the Institute. The candidate should be a Master Degree holder, very well-versed in communication and writing skills in English and the use of computer. A salary of amount Rs One lac per month is being considered. Living accommodation and health-care on the GIK standard terms would be available in Topi.   Applications should reach the office of Pro-Rector (Admin & Finance) by 10th October 2017.   ...
Read more...

Faculty of Computer Science and Engineering, GIK is seeking to fill a vacant position of a Computer Engineer


Faculty of Computer Science and Engineering, GIK Institute of Engineering Sciences and Technology is seeking to fill a vacant position of a Computer Engineer. The requirement for this position is:   A bachelor degree in Computer Engineering from a recognized institution is required. Other related majors may be considered as well.   Please send your resume with transcripts of BS degree to:   Mr. Hamid ur Rehman PS to Dean Faculty of Computer Science and Engineering GIK Institute of Sciences and Technology Topi, Swabi   Email: hamid@giki.edu.pk   Last date for submission of applications is October10, 2017 ...
Read more...

Pre-Qualification of Contractors


Pre-Qualification of Contractors
Read more...

GIK Institute seeks a full time Director (Incubation Center)


GIK Institute seeks a full time Director (Incubation Center)
Read more...

Tender Notice for purchase of computers


Tender Notice for purchase of computers
Read more...

Auction of Store Material - Miscellaneous Items


Please, download the auction notice along with the items' detail, attached here.
Read more...

Vacant Position(s) of Lab Engineer(s) in GIK Institute


Vacant positions of Engineers are available in the Faculty of Engineering Sciences, GIK Institute of Engineering Sciences and Technology, Topi, Distt: Swabi, Khyber Pakhtunkhwa. Criteria for applying: BS degree in Electronic Engineering and Engineering Sciences Interested candidates may send their applications (on the prescribed form, attached below) and CVs on the following address latest by Tuesday, 22nd August, 2017: Prof. Dr. Jameel-Un Nabi Dean, FES GIK Institute of Engineering Sciences and Technology jameel@giki.edu.pk shafiq@giki.edu.pk ...
Read more...

Tender Notice for PSF Project


Please, download the tender document.
Read more...

Vacancy for the position of Gynaecologist


GIK Institute Medical Centre seeks full time Lady doctor (Gynaecologist). Applications on prescribed form along with detailed CV, and a recent photographs should reach HR Department by 21.8.2017. Download the complete advertisement and the application form, attached here.     ...
Read more...

Purchase of Lab Equipment for FMCE


Please, download the tender document.
Read more...

Tender document for FMCE lab equipment


The document is attached:
Read more...

Tender notice for FME lab equipment


The document is attached below. 
Read more...

Faculty Positions Available


Applications are invited from well qualified persons for the positions of Professor, Associate Professor and Assistant Professor in the following disciplines: Civil Engineering (PhD in Civil Engineering) Photonic Engineering (PhD in Photonic Engineering) Requisite qualifications and experience are appended below. Preference will be given to the candidates who are registered with PEC. Apart from an excellent academic and research environment, GIK Institute offers attractive salary package and other facilities at campus. Please, forward your applications to the following address by 24th July, 2017. See the complete advertisement by clicking the attachment. Assistant Director (HR) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026, Fax No. 0938-281032, E-mail: dirhr@giki.edu.pk ...
Read more...

Tender Notice for Furniture Required for Incubation Center


The tender document is attached below.
Read more...

Tender Notice for Purchase of Furniture


Please, find attached the tender document below.
Read more...

Tender Notice for HAINA Academy


Please, find attached the tender document below.
Read more...

Vacant Position of Research Associate in FES


Vacant Position of Research Associate is available under Research Project No. PSF-TUBITAK/KP-GIKI (02). Owing to the nature of project and project  initiation date of 15 June, 2017, preference would be given to candidates already enrolled in PhD program of physics. However candidates with MS degree in physics may also apply. Interested candidates should send applications along with their CVs in hard or soft form to the following address by 30.6.2017:   Prof. Dr. Jameel-Un Nabi PI / Dean, FES GIK Institute of Engineering Sciences and Technology, Topi, Distt: Swabi, Khyber Pakhtunkhwa   Email: jameel@giki.edu.pk   Or   shafiq@giki.edu.pk Ph: 0938-281026-29   (Ext: 2361) ...
Read more...

Tender Notice for Transformer 1000 KvA


Please, find attached the tender document below.
Read more...

Tender Notice for the Purchase of Furniture


Please, find attached the tender document below.
Read more...

Tender Notice for Power Engineering Items


Please, find attached the tender document below.
Read more...

Tender Notice for Electrical Store for Kiosks & HT/LT


Please, download the tender document.
Read more...

Tender Notice for Heat Engine for FME Lab.


Please, download the tender document attached below.
Read more...

Faculty Positions Available


Applications are invited from well qualified persons for the positions of Professor, Associate Professor, Assistant Professor and Research Associate. Please, download the application form along with the advertisement, attached below. ...
Read more...

Tender notice for the purchase of Computer Systems and 3D Robotics Drone


Please, see the tender document attached here.
Read more...

Tender notice for the purchase of Nano Indenter & Ultrasonic Detector


The tender document is attached here.
Read more...

Tender notice for the supply of HT cables


The tender document is attached here.
Read more...

Tender notice for the installation of Marquee


The tender document is attached here.
Read more...

Notice for extension of tender submission date


This is with reference to Tender No. GIKI/PD/LABS-618/17 for the procurement of Lab Equipment (ad appeared in public press on 23-04-17). It is notified that the Tender submission date has been extended from 2nd May, 2017 to 9th May, 2017.    Interested bidders are requested to submit their bids before 3.00 PM on 9th May, 2017.  The technical proposal will be opened in the presence of bidders at 3:30pm on the same day. ...
Read more...

On-Campus Jobs for the Undergraduate Students with Programming Skills


The Institute intends to automate certain units such as Central Mess, Cafeteria, Hospital and Transport Section.   Applications are invited from the eligible students of second or third year batches for 02 positions: (i) Database Developer, and (ii) Dot Net Programmer; on the basis of "On-Campus Jobs For Undergraduate Student". All interested students are advised to submit their applications through their Deans/HoDs concerned to HR Department (Room No. G-15), latest by 5th May, 2017. Please, refer to the advertisement attached here, for further information. ...
Read more...

Notice for the Repair of X-Ray Machine


GIK institute has an X-Ray machine Philips Diagnost-93 power 700 MA, which is out of order. GIK Institute needs the services to repair it and make it fully functional. Quotations are invited from reputed firms/individuals having relevant skills and expertise to examine the machine and give their quotations for complete repair and restoration latest by 30th April, 2017. Assistant Director Procurement, GIK Institute, Topi (KP) Ph: 0938-281026 Ext 2466, Email: Jibran@giki.edu.pk   ...
Read more...

Tender document for the purchase of Laboratory Equipment


Please, click the document attached here.
Read more...

Purchase of Nano INDENTER and Ultrasonic Flaw Detector Kit


See the attachment for details.
Read more...

Job opportunities


JOB OPPORTUNITIES     Applications are invited for the following posts in the GIK.  Requisite qualifications and experience are as under:   Accounts Officer: ICMA (Intermediate) /MBA (Finance) with 02 years relevant experience or B.B.A. 3 years’ course with Accounting & Finance or B.Com (Hons.) three years course preferably first class from a recognized University with 05 years’ experience of accounts/financial management or audit/budget in a government or reputed private institution.  Computer skills is essential.   Junior Teacher, GIK College: B.Ed/M.Ed/MA (Edu) with B.A/B.Sc. Moreover, candidate having teaching experience in an English Medium School or at College level of good repute will be given preference.   Lab. Technician Electrical (Power): 1st class DAE in Electrical (Power) from a Polytechnic Institute. Candidates having three years relevant experience will be given preference. Computer skills are essential.   Lab. Technician (Electronics): 1st class DAE in Electronic Engineering from a Board of Technical Education with 3 years’ post diploma relevant experience in a scientific organization of repute. Candidate should be ideally able to understand and repair general electronics equipment. Computer skills are essential.   Telephone Exchange Supervisor: 1st class DAE in Electronic Engineering from a Board of Technical Education with 3 years’ post diploma relevant experience in organization of repute.   Telephone Operator: F.A/F.Sc from a recognized Board with two years relevant experience.   Female Security Guard: Candidate having qualification of Matric/F.A, F.Sc, under the age of 45 years. Must have at least three years experience in a security organization. Should also be able to understand the sensitivity and nature of job. Moreover, she should have good communication/speaking skills.       Interested candidates should send their C.Vs/applications along with attested copies of educational documents and experience certificates, CNIC and two recent photographs should reach HR Department by 31st March, 2017. Application Form placed on the website may be downloaded. Only short listed applicants will called for interview.     Assistant Director (HR/Admin.) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026, Fax No. 0938-281032 E-mail: dirhr@giki.edu.pk (GIK Institute is an equal opportunity employer)   ...
Read more...

Tender Document for Generator Set


Please see the attached for further details.
Read more...

Tender document for the purchase of computers.


Please, find attached the tender document below.
Read more...

Tender document for office furniture - Brabers Building


See attachment for details.
Read more...

Research Associate is required for PSF-GIK Project in Electronic and Electro-chemical devices


Research Associate is required for PSF-GIK Project in Electronic and Electro-chemical devices. Preference to PhD researcher with at least two 1st divisions. Stipend Rs. 25K/month. Bond required. Apply to khasan@giki.edu.pk by Jan 31, 2017.  ...
Read more...

Tender documents for Laboratory equipment


The Ghulam Ishaq Khan Institute (GIK) of Engineering Sciences and Technology, located at Topi, District Swabi is a seat of excellence in higher engineering education and research. Sealed bids are invited from reputed firms/suppliers for supply, installation, commission of laboratory equipment. For details, see attachment. ...
Read more...

Tender Documents for Incubation Center


Download attached tender documents for the purchase of computer and associated accessories for the Incubation Center.
Read more...

Tender Documents for Lab Equipment


Download the following tender documents.
Read more...

Invitation to Bids


GIK Institute of Engineering Sciences & Technology invites tenders from registered Firms/Suppliers/Individuals for the items quoted in the document, attached here. ...
Read more...

Tender Notice to Establish Food Outlets and Souvenir Shop at GIK Institute


Tender Notice to establish outlets - Fast Food, Ice Cream, etc. and Institute Souvenir Shop. Please, open the attached document for details.
Read more...

Pre-qualification Notice: HVAC & Civil Contractors


Prequalification of HVAC contractors and prequalification of civil contractors for interior works. Please, open the attached document for details.
Read more...

Tender


Please refer to the attachment.
Read more...

Tender notice for Water Proofing



Read more...

Expression of Interest (Architects/ Consulting Engineers)


Please, open the attachment for details.
Read more...

Tender for Convocation Marquee / Dera


For details, open the tender document attached below.
Read more...

Job Oppurtunities at GIK Institute


JOB OPPORTUNITIES   Applications are invited for the following posts in the GIK Institute Campus.  Requisite qualifications and experience are as under:   Director (Procurement):   Master’s Degree in Business Administration  preferably in Supply Chain Management and Finance from a recognized University with 12 years’ experience in procurement (local purchase & imports) in a government or semi government or autonomous or a reputed private organization. Should have good working knowledge of computer and excellent communication skills.   Senior Medical Officer:  MBBS (House job at least six months in medicine and six months in Surgery). Must be registered with PMDC Islamabad. Candidates having experience will be given preference.   Deputy Director (Admissions & Exams.): B.Sc (Engg.) or M.Sc. or M.A. in Social or Administrative Sciences from a recognized university with 5 years post qualification experience of admissions, examinations in an academic institution of repute. Must have knowledge of semester system exams. Credit hours system (grades, grade points average), examination schedule/date sheet and learning Management System.  Good communication and computer skills are essential.   Executive Secretary to Rector:  Graduate, preferably with a Master’s Degree, from a recognized   University with at least 10 years post qualification experience in administrative and secretarial work in a government or reputed private organization. The incumbent must have excellent written, spoken communication, and IT skills. Must be able to set priorities and handle multitasking.  Shorthand and typing speed of 80 and 40 WPM respectively shall be preferred.   Private Secretary: Graduate preferably Master’s degree holder from a recognized university with seven (07) years’ experience of office management in a reputed organization. Shorthand and typing speed of 80 and 40 WPM respectively shall be preferred. Knowledge of word processing is essential.   Lab. Technician (Mechanical):  1st class DAE in Mechanical Engineering from a Board of Technical Education with 3 years’ post diploma relevant experience in a scientific organization of repute. Candidate should be ideally able to understand and repair general mechanical equipment. Computer skills are essential.   Lab. Technician (Electronics): 1st class DAE in Electronic Engineering from a Board of Technical Education with 3 years’ post diploma relevant experience in a scientific organization of repute. Candidate should be ideally able to understand and repair general electronics equipment. Computer skills are essential.   Lab. Technician (Computer Science): Minimum 1st class DAE in Computer Science or relevant field from a Board of Technical Education with 3 years’ post diploma or equivalent/higher degree in Software/hardware, preferably experience in a scientific organization of repute. Candidate should ideally be able to understand and repair OS/hardware including peripherals.   Machinist (Mechanical):  DAE from a Board of Technical Education in General Engineering (Machinist) with two years' post diploma experience.                                                                    Lady Security Guard: Retired armed forces personnel preferably from SSG or other groups with matric qualification. Persons having 10 years’ experience as Security Guard in police will also be considered.”   Interested candidates should send their C.Vs / applications along with attested copies of educational documents and experience certificates, CNIC and two recent photographs should reach the HR Department by 17th May, 2016. Application Form placed on the website may be downloaded. Only short listed applicants will be called for interview.   Assistant Director (HR/Admin.) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026, Fax No. 0938-281032 E-mail: dirhr@giki.edu.pk (GIK Institute is an equal opportunity employer)   ...
Read more...

Tender document for computer equipment


For details, please open the following document.
Read more...

On-Campus Jobs for Undergraduate Students


For details, please open the following attachment.
Read more...

Tender for Laboratory Equipment


Please find the attachment for details.
Read more...

Join as Director ORIC



Read more...

Sindh Endowment Fund Scholarship 2016


Please find the attachment for applicaton form.
Read more...

Application for Management Trainee


Applications are invited for the position of Management Trainees in the GIK Institute. Details are:
Read more...

Tender Notice for UPS


Tender notice for UPS, download the document below:
Read more...

Advertisement for Job Opportunities in GIK


      JOB OPPORTUNITIES Applications are invited for the following posts in the GIK Institute Campus.  Requisite qualifications and experience are as under: Lab. Technician:  1st class DAE in Computer Science from a Polytechnic Institute. Candidates having three years relevant experience will be given preference. Computer skills are essential. Machine Operator (Printing Press) :  Matric with 3 years’ experience in print shop operations in a reputed printing press. Should be computer literate.   GIK MEDICAL CENTER Staff Nurse (Female): Diploma in Nursing from a recognized Institute with 03 years relevant experience in operation theater/emergency care in a reputed Hospital/Medical Center.   GIK COLLEGE Senior Teacher (Physics): 1st class Master’s degree in Physics from a recognized university. Candidates having two years teaching experience in an English Medium School or at College level of good repute will be given preference. Senior Teacher (Computer Science): 1st class Master’s degree in Computer Science with B.Ed. from a recognized university. Candidates having two years teaching experience in an English Medium School or at College level of good repute will be given preference.   Interested candidates should send their C.Vs / applications along with attested copies of educational documents and experience certificates, CNIC and two recent photographs should reach the HR Department by 1st February, 2016. Application Form placed on the website may be downloaded. Only short listed applicants will be called for interview.   Assistant Director (HR/Admin.) GIK Institute, Topi-23640, Swabi, Khyber Pakhtunkhwa Ph: 0938-281026, Fax No. 0938-281032 E-mail: dirhr@giki.edu.pk (GIK Institute is an equal opportunity employer)   ...
Read more...

Tender Notice for Firewall


Here is the tender notice for firewall.
Read more...

Enlistment of Custom Clearing Agent


Please find the attached file.
Read more...

No Job Openings


Currently there are No Job Openings.
Read more...

No Tender Notice


Currently there are No Tender Notices.  
Read more...

Quotation for purchase of ANSYS Software


Please see the attachment for more details.
Read more...

Quotation for IT equipment


Please see the attachment for more details.  
Read more...

Tender for Medical Equipment


Please see the attached file for details.
Read more...

Supply and installation of Concertina Razor Wire 24


Please see the attachment for details.  
Read more...

Founding Director, School of Management Sciences


Please see the attachment for details.
Read more...

Quotation for Branded Server


Please find attach for details.
Read more...

No Job Openings


Currently there are no Job Openings. 
Read more...

Tender notice for purchase of equipment


Please find complete detail in the attachement.  
Read more...

Tender Notice for Laboratory equipment


Please find Attach the Tender documents of Laboratory equipment for Pak US Project.
Read more...

Auction Notice


Please Find Attach.
Read more...

Tender Notice for IT-Equipment


Please see attached File.
Read more...

Auction Notice for Sale of Wood Logs / Bamboo & Citrus Fruit


Please see attached file.
Read more...

FACULTY REQUIRED


Download the attachment for details.
Read more...

Tender Notice for Enlistment of Clearing Agent


The GIK Institute intends to hire custom clearing agent for custom clearance of its import at Karachi, Lahore and Islamabad / Rawalpindi, Download the attachment for details. ...
Read more...